89Notch 5.3/T76 turbo/th400 etc Build Thread.
#288
TECH Resident
Thread Starter
iTrader: (3)
Join Date: Oct 2006
Location: edmonton alberta canada
Posts: 858
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ran the car last night and learned a few things.
It ran 9.55 @143.5 1.49 60 foot and 116.85 1/8 mph and 6.17 1/8 ET
BUT its blowing through the converter HARD, its on the limiter at 6800 about 300 feet short, hence the low top end mph.
That was on 14psi and pump gas/meth.
I think with a real converter in it and get it to actually 60 foot its got some 30's in it pretty easy.
It ran 9.55 @143.5 1.49 60 foot and 116.85 1/8 mph and 6.17 1/8 ET
BUT its blowing through the converter HARD, its on the limiter at 6800 about 300 feet short, hence the low top end mph.
That was on 14psi and pump gas/meth.
I think with a real converter in it and get it to actually 60 foot its got some 30's in it pretty easy.
#291
10 Second Club
iTrader: (18)
Join Date: Dec 2005
Location: kentucky
Posts: 334
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i am building a 6.0 turbo notch for my brother and thats what i was planning on doing was just buy the pipes bent. What size single turbo should i run with a stock 6.0, turbo cam, th350 with 3.55 or so gears? t76?
Last edited by udlose99ta; 07-19-2009 at 09:23 AM.
#292
TECH Fanatic
iTrader: (6)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
#299
TECH Resident
Thread Starter
iTrader: (3)
Join Date: Oct 2006
Location: edmonton alberta canada
Posts: 858
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
You got it , I just borrowed some wheels to use for the drive down with drag radials. Normally I rip around town on slicks on my black wheels...... Wheels are powder coated BTW not painted lol