A few pics of my Fox/LS1 build
#181
TECH Apprentice
Thread Starter
iTrader: (20)
Join Date: Jan 2007
Location: Spartanburg, SC
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Freaking place was packed!! I was only able to make 2 run....45 min. in the staging lane each time...screw that!
No 7's tonight.....first run spinning badly in 1st was a 8.14 @87.77 with a nasty 1.92 60' .I was running 18 psi. in the tires,left at 3k and I forget to loosen up the struts()
Next pass was a 8.08 @89.72 still spinning badly to a 1.91 60'. 18 psi. struts on #2.
Nothing broke, so all in all everything went ok. Once I was able to get into 2nd the car felt very good. I know this thing has a good 2-3 tenths in it...maybe more. I want to play around with the air pressure and launching rpm's when its not so crowded .
No 7's tonight.....first run spinning badly in 1st was a 8.14 @87.77 with a nasty 1.92 60' .I was running 18 psi. in the tires,left at 3k and I forget to loosen up the struts()
Next pass was a 8.08 @89.72 still spinning badly to a 1.91 60'. 18 psi. struts on #2.
Nothing broke, so all in all everything went ok. Once I was able to get into 2nd the car felt very good. I know this thing has a good 2-3 tenths in it...maybe more. I want to play around with the air pressure and launching rpm's when its not so crowded .
#183
TECH Apprentice
Thread Starter
iTrader: (20)
Join Date: Jan 2007
Location: Spartanburg, SC
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
I swear I'm a dumb ***! After looking at the instructions for the struts I realized I adjusted them the wrong way! Anyway, I hope to get back to the track next Sat. afternoon .
Yeah, I would love to get in on one!
best thing to do is get in on a track rental, thats what we do
#186
TECH Apprentice
Thread Starter
iTrader: (20)
Join Date: Jan 2007
Location: Spartanburg, SC
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Motor, trans and wiring harness for sale........please see link for details!
https://ls1tech.com/forums/showthrea...636&highlight=
https://ls1tech.com/forums/showthrea...636&highlight=
#187
On The Tree
Man that sucks, you're selling the motor and stuff. Well, it happens. I am selling my car after I get it running( or if the price is right as it sits ). What are you going to do now?
#190
TECH Apprentice
Thread Starter
iTrader: (20)
Join Date: Jan 2007
Location: Spartanburg, SC
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys. It's been a long while since I have updated this post. I'll give a quick run-down as to it's current stage.
As of right now the car is tore apart (again) for paint.I have sold the LS1 and the T56. I have a 6.0 and a Th350 that will be taking there place. The 6.0 is a stock LQ4. I have a new set of L92 heads and a L76 intake that I'm fixing to throw on it. I just ordered my cam, springs,pushrods,timing chain and head gaskets this morning from Texas Speed. Pretty much all I have left to buy are a shifter, converter and throttle body. I do have another 6.0 shortblock that I plan on building after I get this set-up running.
As of right now the car is tore apart (again) for paint.I have sold the LS1 and the T56. I have a 6.0 and a Th350 that will be taking there place. The 6.0 is a stock LQ4. I have a new set of L92 heads and a L76 intake that I'm fixing to throw on it. I just ordered my cam, springs,pushrods,timing chain and head gaskets this morning from Texas Speed. Pretty much all I have left to buy are a shifter, converter and throttle body. I do have another 6.0 shortblock that I plan on building after I get this set-up running.
#191
Staging Lane
iTrader: (2)
Join Date: Jun 2006
Location: Mooresville, IN
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys. It's been a long while since I have updated this post. I'll give a quick run-down as to it's current stage.
As of right now the car is tore apart (again) for paint.I have sold the LS1 and the T56. I have a 6.0 and a Th350 that will be taking there place. The 6.0 is a stock LQ4. I have a new set of L92 heads and a L76 intake that I'm fixing to throw on it. I just ordered my cam, springs,pushrods,timing chain and head gaskets this morning from Texas Speed. Pretty much all I have left to buy are a shifter, converter and throttle body. I do have another 6.0 shortblock that I plan on building after I get this set-up running.
As of right now the car is tore apart (again) for paint.I have sold the LS1 and the T56. I have a 6.0 and a Th350 that will be taking there place. The 6.0 is a stock LQ4. I have a new set of L92 heads and a L76 intake that I'm fixing to throw on it. I just ordered my cam, springs,pushrods,timing chain and head gaskets this morning from Texas Speed. Pretty much all I have left to buy are a shifter, converter and throttle body. I do have another 6.0 shortblock that I plan on building after I get this set-up running.
Kris
#192
10 Second Club
iTrader: (35)
Join Date: Feb 2005
Location: Indiana boy
Posts: 4,174
Likes: 0
Received 0 Likes
on
0 Posts
I have a th400 and I am using the quarter stick with the pistol grip and the botton on top. My converter is a TCS4500. I have not got it in yet, so I'm not real sure on how to rout the cable, but I hope to be at that point by early sept.
We are hanging the rods on the pistons tonight and then putting it together Thursday night.
We are hanging the rods on the pistons tonight and then putting it together Thursday night.
#193
TECH Apprentice
Thread Starter
iTrader: (20)
Join Date: Jan 2007
Location: Spartanburg, SC
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Here are a couple pics I took last week. They are from my cell phone , so the quality is not that great. I did get my converter and throttle body last week though. I was trying to get it ready to go to the LXS shootout next month, but it doesn't look like that going to happen. I guess I'll take the wife instead.