Chevy II Ls1 pics!
Thread Starter
TECH Apprentice
iTrader: (10)
Joined: Mar 2005
Posts: 300
Likes: 0
From: Virginia Beach. VA
Chevy II Ls1 pics! I ended up having to redo the rear end housing which set me back a bit. The floors are getting done in about 3 weeks and the project should gain some speed. I am hoping to finish the car and have it running by the end of August.
This is going to be my ride height and I am going to run those wheels haha
This is going to be my ride height and I am going to run those wheels haha
Thread Starter
TECH Apprentice
iTrader: (10)
Joined: Mar 2005
Posts: 300
Likes: 0
From: Virginia Beach. VA
Trending Topics
I recently bought a set of S&S headers built for the TCI clip. I am running a heidts but dont see why they wouldnt fit. Check out steves nova site for more info or pm me. I dont have them yet but should have them soon.
Jamin
Jamin
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Good luck on the long tubes. I made my own, for TCI clip. There is supposedly a company making them, that TCI will be selling, but don't think that is going to happen till Aug either.
Looks good though.
Looks good though.
Thread Starter
TECH Apprentice
iTrader: (10)
Joined: Mar 2005
Posts: 300
Likes: 0
From: Virginia Beach. VA
Thread Starter
TECH Apprentice
iTrader: (10)
Joined: Mar 2005
Posts: 300
Likes: 0
From: Virginia Beach. VA
Thread Starter
TECH Apprentice
iTrader: (10)
Joined: Mar 2005
Posts: 300
Likes: 0
From: Virginia Beach. VA
Yes I am very interested in the headers! Can you send me pics and info on them if you can. Thanks
BTW, what is up the Lemon headers for the kit, anyone have any pics!
Thanks Mark
The member here is named Steve. We are both in chicago and I talk to him every now and then through email. I got the information from him through email a few months ago. S&S is VERY slow and I have already been waiting a month and I believe steve waited over 6 months for his. His set was the first produced though, they tell me I should have mine any day.
They are a custom long tube header designed around the TCI front clip. Since the TCI clip actually narrows down it has less room for the headers to fit. I am almost positive they will work with the other clips on the market as well. I think they were about $550 coated and were running about $375 uncoated. They seem like a great value. I cant wait to get them.
If someone needs pictures I can email them, I do not have them hosted anywhere. They are the pictures from Steve and I am sure he would be ok with me sending the pictures. He said the headers were beautiful and I agree from the pictures. PM me or post an email address and I will send them out.
I hope this helps.
Jamin
They are a custom long tube header designed around the TCI front clip. Since the TCI clip actually narrows down it has less room for the headers to fit. I am almost positive they will work with the other clips on the market as well. I think they were about $550 coated and were running about $375 uncoated. They seem like a great value. I cant wait to get them.
If someone needs pictures I can email them, I do not have them hosted anywhere. They are the pictures from Steve and I am sure he would be ok with me sending the pictures. He said the headers were beautiful and I agree from the pictures. PM me or post an email address and I will send them out.
I hope this helps.
Jamin
Thread Starter
TECH Apprentice
iTrader: (10)
Joined: Mar 2005
Posts: 300
Likes: 0
From: Virginia Beach. VA
I would use them but my tube chasis 2x3 tubing will get in the way. The only way for me to run exhaust correctly is throw the trans tunnel or around the tranny through the ceter of the car...
Thread Starter
TECH Apprentice
iTrader: (10)
Joined: Mar 2005
Posts: 300
Likes: 0
From: Virginia Beach. VA
The member here is named Steve. We are both in chicago and I talk to him every now and then through email. I got the information from him through email a few months ago. S&S is VERY slow and I have already been waiting a month and I believe steve waited over 6 months for his. His set was the first produced though, they tell me I should have mine any day.
They are a custom long tube header designed around the TCI front clip. Since the TCI clip actually narrows down it has less room for the headers to fit. I am almost positive they will work with the other clips on the market as well. I think they were about $550 coated and were running about $375 uncoated. They seem like a great value. I cant wait to get them.
If someone needs pictures I can email them, I do not have them hosted anywhere. They are the pictures from Steve and I am sure he would be ok with me sending the pictures. He said the headers were beautiful and I agree from the pictures. PM me or post an email address and I will send them out.
I hope this helps.
Jamin
They are a custom long tube header designed around the TCI front clip. Since the TCI clip actually narrows down it has less room for the headers to fit. I am almost positive they will work with the other clips on the market as well. I think they were about $550 coated and were running about $375 uncoated. They seem like a great value. I cant wait to get them.
If someone needs pictures I can email them, I do not have them hosted anywhere. They are the pictures from Steve and I am sure he would be ok with me sending the pictures. He said the headers were beautiful and I agree from the pictures. PM me or post an email address and I will send them out.
I hope this helps.
Jamin
I would love some pics!!
Thanks Mark Tisdale
mtizzy2003@yahoo.com
