94 Mustang 6.0L
08-02-2008, 01:03 AM
#1
Teching In
Thread Starter
iTrader: (3)
Join Date: Jul 2008
Location: Davie, FL
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
94 Mustang 6.0L Here is my mustang project I have been working on for a while. Its a stock 6.0L out of a truck. Changed it over to carb with the edelbrock Vr. Jr and the MSD 6010. Made my own motor plates. Has a Vortech V-2 S-Trim. TH350 trans and 4500 converter. 8.8 with 4.10 gear. Should run good for a 17yr olds project.
08-02-2008, 01:34 AM
#7
Teching In
Thread Starter
iTrader: (3)
Join Date: Jul 2008
Location: Davie, FL
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
I have already started it but got to get trans built and get converter. I have already got the carb bonnet and piping. Shouldnt be but a few more weeks. My last car went 7.90s this time i want to go in the high 6s so maybe.
Trending Topics
08-02-2008, 06:52 AM
#11
On The Tree
iTrader: (20)
Join Date: Mar 2005
Location: Denton, NC
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Cool project man. I've got a 91 LX that i'm doing a T-76 6.0L swap into here in the next few months. Good luck with the car. It should run high 6's easy tuned right and the chassis set up. Keep us posted on the car and how it's coming together.
08-03-2008, 11:06 PM
#16
Teching In
Thread Starter
iTrader: (3)
Join Date: Jul 2008
Location: Davie, FL
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Would like to sell the Vortech S-Trim and maybe do a turbo setup. Would it be worth doing? Plans were to use the BW S400 75mm but bought this thing instead.
08-04-2008, 12:27 AM
#18
Teching In
Thread Starter
iTrader: (3)
Join Date: Jul 2008
Location: Davie, FL
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Yeah started on the carb today converting it to blow through by just using what I have read. Im pretty sure I will be able to do it but if not there is a few people that can. Just thought the turbo would make quite a bit more power
