Corvette Performance
C5 | Z06 | C6 | ZR1 | C7

UPDATE Allngn_c5's 402 with REV Xtreme 95mm tb RESULTS

Thread Tools
 
Search this Thread
 
Old 02-17-2009, 06:47 PM
  #1  
TECH Senior Member
Thread Starter
iTrader: (3)
 
allngn_c5's Avatar
 
Join Date: Apr 2006
Location: Western Burbs of Detroit
Posts: 6,524
Likes: 0
Received 1 Like on 1 Post
Default UPDATE Allngn_c5's 402 with REV Xtreme 95mm tb RESULTS

Let me take a second and thank Tracy over at Rev Xtreme for performing the necessary modification on my billet 95mm tb to make it work correctly. Also want to thank Louis Gigliotti for taking a good amount of time out of his already overworked day for swapping tb's, tweaking the tune, and slapping her on the dyno !!! Thanks Louis, the results were definately worth waiting for.

Initial numbers before any tuning were around 507 rwhp 496 rwtq with the ls2 90mm tb. After tweaking the tune a little she made 511 rwhp 500 rwtq, and this is still with the ls2 90mm tb. Now these last numbers are with the REV Xtreme billet 95mm tb. 517.3 rwhp / 513.8 rwtq !! Thats a gain of 6.3 rwhp and 13.8 rwtq !! Not too shabby. Makes me wonder what would've happened had I took Ron's (Vengeance Racing) advice and went ahead and let him open the intakes inlet up to 100 mm and match it to the Rev Xtreme 100 mm tb? Oh well, not going to go there, but for ***** and giggles I'd bet 520/515. Either way I am happy.

Bobby said he will scan the graph and post it up tomorrow.

Thanks to everyone at LG Motorsports (Louis, Bobby, Anthony, Sean, Mikey)
Thanks to Ron at Vengeance Racing for doing a great job on the intake.
Thanks to Tracy at Rev Xtreme for modding the tb, and getting it back to LGM for the swap. Sorry it took so long to get some results to ya, but the shop has been VERY BUSY. Thanks again Louis.
Old 02-17-2009, 07:04 PM
  #2  
On The Tree
iTrader: (3)
 
BADZOH6's Avatar
 
Join Date: Jan 2009
Location: Georgia
Posts: 126
Likes: 0
Received 0 Likes on 0 Posts
Default

Let me be the first to say CONGRATS!!! Now go get that thing and give it HELL!!!!
Old 02-17-2009, 07:52 PM
  #3  
11 Second Club
iTrader: (13)
 
venom ws7's Avatar
 
Join Date: Jul 2003
Location: EARTH
Posts: 5,965
Likes: 0
Received 1 Like on 1 Post

Default

Big Congrats man those are awesome TQ numbers.

I wish Fadi didnt sell his C6 ZO6 this time I'm sure you can beat him but maybe you should race with his new Lambo.
lol
Old 02-17-2009, 08:01 PM
  #4  
TECH Senior Member
Thread Starter
iTrader: (3)
 
allngn_c5's Avatar
 
Join Date: Apr 2006
Location: Western Burbs of Detroit
Posts: 6,524
Likes: 0
Received 1 Like on 1 Post
Default

Thanks fellas. I am very surprised at how much torque she picked up. Too bad I didn't go with the 100mm inlet and 100 mm tb on Ron's (VENGEANCE) ported 92 FAST. Not complaining just saying what if ??


GRAPH will be up tomorrow. Can't wait to see it.
Old 02-17-2009, 08:38 PM
  #5  
TECH Senior Member
iTrader: (7)
 
Ragtop 99's Avatar
 
Join Date: Nov 2001
Location: Bethesda, MD
Posts: 9,491
Likes: 0
Received 1 Like on 1 Post

Default

Get on a plane and go get that thing!
Old 02-17-2009, 09:57 PM
  #6  
TECH Senior Member
Thread Starter
iTrader: (3)
 
allngn_c5's Avatar
 
Join Date: Apr 2006
Location: Western Burbs of Detroit
Posts: 6,524
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by Ragtop 99
Get on a plane and go get that thing!
I'd like to, but we got 1-3 inches of snow coming in. Its not even a possibility to go drive her home.
Old 02-17-2009, 11:19 PM
  #7  
TECH Fanatic
iTrader: (16)
 
scramblerman's Avatar
 
Join Date: Apr 2005
Location: Romeoville, IL
Posts: 1,419
Likes: 0
Received 0 Likes on 0 Posts

Default

Awesome numbers man! Congrates, that thing outta haul some major ****!
Old 02-17-2009, 11:45 PM
  #8  
TECH Addict
iTrader: (35)
 
98camaroLS1M6's Avatar
 
Join Date: Dec 2005
Location: Cherry Hill, NJ
Posts: 2,373
Likes: 0
Received 0 Likes on 0 Posts

Default

Youre going to need some wide 315 mt dr radials or something to help put the power down lol.
Old 02-18-2009, 08:28 AM
  #9  
TECH Senior Member
Thread Starter
iTrader: (3)
 
allngn_c5's Avatar
 
Join Date: Apr 2006
Location: Western Burbs of Detroit
Posts: 6,524
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by 98camaroLS1M6
Youre going to need some wide 315 mt dr radials or something to help put the power down lol.
I do have a line lock for the track and 305 35r18 Nittos dr's. Hope they work better this year at the track with some heat in them. They do well on the street. I am really going to have to relearn how to drive this thing.
Old 02-18-2009, 09:04 AM
  #10  
TECH Addict
iTrader: (35)
 
98camaroLS1M6's Avatar
 
Join Date: Dec 2005
Location: Cherry Hill, NJ
Posts: 2,373
Likes: 0
Received 0 Likes on 0 Posts

Default

Oh thats good lol, it's going to have to be like 90degrees out for any kind of traction on the street, nah you'll just have to pedal it lol.
Old 02-18-2009, 09:35 AM
  #11  
FormerVendor
 
Bobby @ LGM's Avatar
 
Join Date: Jan 2005
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Default

Old 02-18-2009, 09:46 AM
  #12  
TECH Apprentice
iTrader: (2)
 
SlowFRC's Avatar
 
Join Date: Aug 2008
Location: DC Suburbs
Posts: 305
Likes: 0
Received 0 Likes on 0 Posts
Default

Its about damn time you got some numbers, we've been waiting forever. I'm going to second what everyone else said, the HP gain isn't bad but nice TQ gains. It seems like you were looking for more TQ across the board and you definately accomplished it with this set up. Congrats.
Old 02-18-2009, 09:53 AM
  #13  
TECH Resident
iTrader: (6)
 
miami993c297's Avatar
 
Join Date: Jul 2004
Location: West Palm Beach fl usa
Posts: 934
Received 0 Likes on 0 Posts

Default

Originally Posted by Bobby @ LGM
So nice available power in the (wide) powerband...and below as well...!!!!!!!!!
Cant wait to hear how amazing it drives on the road.

Christian
Old 02-18-2009, 11:08 AM
  #14  
TECH Senior Member
Thread Starter
iTrader: (3)
 
allngn_c5's Avatar
 
Join Date: Apr 2006
Location: Western Burbs of Detroit
Posts: 6,524
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by SlowFRC
Its about damn time you got some numbers, we've been waiting forever. I'm going to second what everyone else said, the HP gain isn't bad but nice TQ gains. It seems like you were looking for more TQ across the board and you definately accomplished it with this set up. Congrats.
I have to say thanks for the enthusiasm SlowFRC and comments about the gains.

However I have to wonder what gives you the right to come on here and post "its about damn time you got some numbers, we've been waiting forever" ?? When you make comments without knowing the arrangement I have with LGM then you paint a picture for everyone that reads this thread that LGM didn't make any effort to get my project done in a timely fashion. On the contrary I authorized LGM to take as much time as necessary to do everything right, and that's what they did. They did everything right, and everytime there was a block of time available they put 100% of there energy into my car. My project has taken a lot longer then anticipated due to ls2 blocks were on back order, gm shipped the wrong block once, callies 4 inch cranks were on back order. Also when the new motor was installed and started for the first time it was discovered that the NEW tb had an issue. So back to Tracy at REV who promptly modded it and returned it to LGM. It all adds up to delays. The delays made me miss my window to pick up the car before the weather turned to crap here in Michigan so I authorized LGM to put my car on the back burner. When there was time my modded tb was installed, tune tweaked, and re dyno'd. You need to understand that if I am ok with the arrangement, you should be too. LGM has a duty to put priority where priority is needed. I am no position to walk over and get my car so I told them it was fine to not treat my car as a first priority. Hell it was almost done anyways and I won't be picking it up until spring unless it comes back via transport. So with that being said I am very happy with the results of my LGM built, installed, and tuned ls2 based 402.

On a side note, maybe the longer my car is around the more the test bug will bite at Louis and encourage him to do some testing on my car with a couple of the new items they have at the shop.
Old 02-18-2009, 11:10 AM
  #15  
TECH Senior Member
Thread Starter
iTrader: (3)
 
allngn_c5's Avatar
 
Join Date: Apr 2006
Location: Western Burbs of Detroit
Posts: 6,524
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by miami993c297
So nice available power in the (wide) powerband...and below as well...!!!!!!!!!
Cant wait to hear how amazing it drives on the road.

Christian
Yeah uncle C !! 400+ rwtq from 2500 rpms all the way to 6700 rpms !!! Gotta love 513.8 peak rwtq too !!!

Now when are we going to see your motor together ?
Old 02-18-2009, 12:31 PM
  #16  
TECH Addict
iTrader: (35)
 
98camaroLS1M6's Avatar
 
Join Date: Dec 2005
Location: Cherry Hill, NJ
Posts: 2,373
Likes: 0
Received 0 Likes on 0 Posts

Default

Wow, I like how the hp peaks around 6k and holds to almost 6.5k before it starts to drop, that's awesome. It'd be cool to see a graph overlay between both TBs. Looks like shifting at 6200-6300rpms would be optimal.
Old 02-18-2009, 12:48 PM
  #17  
TECH Senior Member
Thread Starter
iTrader: (3)
 
allngn_c5's Avatar
 
Join Date: Apr 2006
Location: Western Burbs of Detroit
Posts: 6,524
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by 98camaroLS1M6
Wow, I like how the hp peaks around 6k and holds to almost 6.5k before it starts to drop, that's awesome. It'd be cool to see a graph overlay between both TBs. Looks like shifting at 6200-6300rpms would be optimal.
Hey bro, the overlayed graph is the 2 tb's. The higher number is with the reve xtreme 95 mm billet tb. The lower numbers are with the ls2 90 mm tb.

Thanks for the positive critique of the graph. I was scrutinizing over it as well. She's going to be strong everywhere as far as I can tell. Power under the curve is amazing. This car is going to be so fun driving on trips. It'll make getting there more then 1/2 the fun. LOL
Old 02-18-2009, 01:00 PM
  #18  
TECH Addict
iTrader: (35)
 
98camaroLS1M6's Avatar
 
Join Date: Dec 2005
Location: Cherry Hill, NJ
Posts: 2,373
Likes: 0
Received 0 Likes on 0 Posts

Default

Oh I didn't see the dates on the graph, and for some reason I thought you made 500rwtq with the ls2 TB or was that rounded? But yeah power everywhere, you can't ask for more than that lol. Did you ever figure out the exact SCR/DCR?
Old 02-18-2009, 01:03 PM
  #19  
TECH Senior Member
Thread Starter
iTrader: (3)
 
allngn_c5's Avatar
 
Join Date: Apr 2006
Location: Western Burbs of Detroit
Posts: 6,524
Likes: 0
Received 1 Like on 1 Post
Default

I believe the 496.69 was the untuned run with the ls2 tb and after Louis tweaked it she made 500.xx rwtq. Either way I am shocked at the amount of torque the 95mm tb from Rev Xtreme added. Thanks Tracy.
Old 02-18-2009, 01:05 PM
  #20  
TECH Senior Member
Thread Starter
iTrader: (3)
 
allngn_c5's Avatar
 
Join Date: Apr 2006
Location: Western Burbs of Detroit
Posts: 6,524
Likes: 0
Received 1 Like on 1 Post
Default

SCR / DCR exact numbers no. I think SCR was around 11.4 : 1 and never asked what the DCR was.


Quick Reply: UPDATE Allngn_c5's 402 with REV Xtreme 95mm tb RESULTS



All times are GMT -5. The time now is 06:05 PM.