White Devil, off life support. Teaser pics
Thread Starter
TECH Senior Member
iTrader: (5)
Joined: Apr 2005
Posts: 6,353
Likes: 6
From: East Coast
Thread Starter
TECH Senior Member
iTrader: (5)
Joined: Apr 2005
Posts: 6,353
Likes: 6
From: East Coast
Thread Starter
TECH Senior Member
iTrader: (5)
Joined: Apr 2005
Posts: 6,353
Likes: 6
From: East Coast
Time. It escapes me.
But, in the couple minutes here and there,..I ran wires through firewall for widebands, still haven't given power though, found power steering leak, loose fitting, heat treated underside of hood, converted tires to nitrogen...cause I could, made some filters,..and added another 300 rpm to the tune. Still needs some time,...I just have little of it.
http://www.youtube.com/watch?v=G5Izit_dabw
But, in the couple minutes here and there,..I ran wires through firewall for widebands, still haven't given power though, found power steering leak, loose fitting, heat treated underside of hood, converted tires to nitrogen...cause I could, made some filters,..and added another 300 rpm to the tune. Still needs some time,...I just have little of it.
http://www.youtube.com/watch?v=G5Izit_dabw
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Thread Starter
TECH Senior Member
iTrader: (5)
Joined: Apr 2005
Posts: 6,353
Likes: 6
From: East Coast
Thanks man,..almost.
Thanks pimpin.
Thank bro. Work in progress... almost done.
Thread Starter
TECH Senior Member
iTrader: (5)
Joined: Apr 2005
Posts: 6,353
Likes: 6
From: East Coast
Not dead.
Have had issues,..long story short, in my, and several others opinion, camshaft related. So,...after a lot of diag, tunes on my stock ecm, injectors, MAF codes, etc...I am hoping to put this all past me very soon, and have the car driveable as it was over a year ago. with that said...basically I wanted to run an undisclosed spec'd camshaft,..and I was wrong to think I could on what I had...stock ecm, etc. Anywho, you never know until you learn the hard way, and one day, we'll use the cam in a bigger inch project and call it a day.
That nonsense said...
New camshaft, injectors, steering gear going in this weekend coming up,....hoping to be rolling by sunday(street ready). If it's not running by this weekend, i'm also bring the AK. So for the cars sake, I am hoping it goes smoothly.
Keep you all posted with pics and videos.
Have had issues,..long story short, in my, and several others opinion, camshaft related. So,...after a lot of diag, tunes on my stock ecm, injectors, MAF codes, etc...I am hoping to put this all past me very soon, and have the car driveable as it was over a year ago. with that said...basically I wanted to run an undisclosed spec'd camshaft,..and I was wrong to think I could on what I had...stock ecm, etc. Anywho, you never know until you learn the hard way, and one day, we'll use the cam in a bigger inch project and call it a day.
That nonsense said...
New camshaft, injectors, steering gear going in this weekend coming up,....hoping to be rolling by sunday(street ready). If it's not running by this weekend, i'm also bring the AK. So for the cars sake, I am hoping it goes smoothly.
Keep you all posted with pics and videos.
Not dead.
Have had issues,..long story short, in my, and several others opinion, camshaft related. So,...after a lot of diag, tunes on my stock ecm, injectors, MAF codes, etc...I am hoping to put this all past me very soon, and have the car driveable as it was over a year ago. with that said...basically I wanted to run an undisclosed spec'd camshaft,..and I was wrong to think I could on what I had...stock ecm, etc. Anywho, you never know until you learn the hard way, and one day, we'll use the cam in a bigger inch project and call it a day.
That nonsense said...
New camshaft, injectors, steering gear going in this weekend coming up,....hoping to be rolling by sunday(street ready). If it's not running by this weekend, i'm also bring the AK. So for the cars sake, I am hoping it goes smoothly.
Keep you all posted with pics and videos.
Have had issues,..long story short, in my, and several others opinion, camshaft related. So,...after a lot of diag, tunes on my stock ecm, injectors, MAF codes, etc...I am hoping to put this all past me very soon, and have the car driveable as it was over a year ago. with that said...basically I wanted to run an undisclosed spec'd camshaft,..and I was wrong to think I could on what I had...stock ecm, etc. Anywho, you never know until you learn the hard way, and one day, we'll use the cam in a bigger inch project and call it a day.
That nonsense said...
New camshaft, injectors, steering gear going in this weekend coming up,....hoping to be rolling by sunday(street ready). If it's not running by this weekend, i'm also bring the AK. So for the cars sake, I am hoping it goes smoothly.
Keep you all posted with pics and videos.
Hopefully you get everything sorted out over the weekend.
Thread Starter
TECH Senior Member
iTrader: (5)
Joined: Apr 2005
Posts: 6,353
Likes: 6
From: East Coast
Anywho,...i'm just waiting on the cam now, and I priced out a steering rack,...holy crap it's expensive. Anyone have one laying around?
I am hoping so to man, thanks. With this hurricane coming, and the cam not arriving yet,...I am starting to think, it may not happen again.
We shall see.
If anyone has a steering gear they aren't using,...give me a shout please.
Thread Starter
TECH Senior Member
iTrader: (5)
Joined: Apr 2005
Posts: 6,353
Likes: 6
From: East Coast
So, one cam swap later,...and I have a working vehicle again. It now idles on its own. BIG thanks to my cousin Josh deubel and my boy Dave Paris for taking they're weekend and helping me do the swap in a day(not easy on a PTK car). Thanks to Diablosports Mike Litsch and Johan Mangs for putting up with my F'd up setup and trying to help me get this thing right,..I appreciate it. Thanks also to Brian Mcmahon for his help also in trying to get this thing runnning. I appreciate everyones help.
That said, I have just a few things to finish up on the car. Re due plug wires, figure out plug/coil setup,..I have a couple of traction codes,..and a few lines to clean up. My oil feed lines are old, and now leaking after sitting for some time,...gotta change that now.
Good news is, it is truly close to street driving. Hopefully within the next month, I will be starting a new thread,..with some street vids.
keep you posted.
That said, I have just a few things to finish up on the car. Re due plug wires, figure out plug/coil setup,..I have a couple of traction codes,..and a few lines to clean up. My oil feed lines are old, and now leaking after sitting for some time,...gotta change that now.
Good news is, it is truly close to street driving. Hopefully within the next month, I will be starting a new thread,..with some street vids.
keep you posted.
Awesome, I was psyched to hear it was idling on its own yesterday.
You guys may have set a record time on that cam swap
You guys may have set a record time on that cam swap
