50_Dave

What size rim would these need to go on, and will i need a spacer or to do a minitub on the z06 for me to get these to fit?

Thanks

David

jonszr1

i use tthem on my zr1 its best to put them on a 12 in rim if you put them on an 11in rim you will have a contact patch problem at the strip

jonszr1

opps forgot about part 2 they will fit your z06 just have to get the back space right

allngn_c5

iTrader: (3)

I believe you will require the MINI TUB Dave. The biggest tire I can run is a set of Mickey Thompson 305 35r 18's on the back. Any wider and you will have some kind of issues. Bobby didn't specify, I assume rubbing. Can't wait to get them. Will be sure to tell you how they look and how they hook. Stay cool bro.

50_Dave

Are those tires out?

id kill for a set of 305/35/18 mickety thompson drag radials.

allngn_c5

iTrader: (3)

Dave I will PM you with details ok......Yes they are out but on back order

2MuchRiceMakesMeSick

I have 335s on my car sitting on a 11 inch rim. It really should be 11.5 or 12.





They do not rub and no tub was needed. My car is lowered too.

allngn_c5

iTrader: (3)

Thats' good to know. I didn't think a lowered vette could run that much tire. I see I was wrong. Thanks for the info 2MRMMS...

ls1290

iTrader: (20)

Min of 11.5" and ideally a 12". Unless you want them to stick way out of the fender, you will need to minitub. With a minitub, you can get them to line up like stock

Keith

Chalky

iTrader: (2)

CCW says a 335 wil work with their 11.5" and the removal of the rear brake duct on the Z06's.
http://www.ccwheel.com/files/technical/expand.php?id=3