nmass399

http://www.youtube.com/watch?v=PmB9nZsG9VY

This was my 11.77 run where i spun like crazy still managed a 1.7 60 on that

Later on that night after getting in the lane that hooked i run a 11.5488 at 117 with a 1.58 60 ft. Raceweight should be around 3350.

http://www.streetfire.net/photo/2001970.htm

Here is a pic of my 2 best time slips. Gonna make a few adjustments and go back again this coming sunday and see if i can get it into the 11.4x's

Here is the photo album of the Fast 102

http://www.streetfire.net/photo/dsc00312jpg_2003072.htm

Jake99

iTrader: (2)

Awsome running car, to bad you didnt catch a vid of the 11.5 cause i bet she took off hard. 1-7/8 headers and duel 3in open exhaust is crazy for an all stock motor but its work damm good for you. Theres 10s in that car with just a cam for shur..

Carter01

iTrader: (11)

That is crazy for SI! Congrats!!!!

vette0009

Nice Launch and driving for sure

Say hows that monster clutch working out ?

And does it have good enough manners for the street ?

Also Which Package did you buy 2 or 3 ? steel flywheel/ Or Aluminum

nmass399

Thanks guys, the monster clutch is good, i got the stage 3 with the chromeoly flywheel. Its very street friendly but it does make a little bit of a squealing noise if you slip it every now and then but it does not bother me.

nmass399

I got another video someone else took, I think this was the 11.54 run

http://www.youtube.com/watch?v=9ZvAY...embedded#at=13

ramairetransam

iTrader: (18)

how the hell is this so fast ?

jtsta02

iTrader: (1)

what do u mean stock internals, it sounds like it has a pretty good size cam in it. so, is it from the factory stock, or race talk stock??

Jay-P

iTrader: (16)

Stock internal is just that, factory stock, nothing but bolt-ons aloud. Doesnt sound like a cam to me, just an open cut-out.

nmass399

Its open headers with torque tubes(collector extensions). Stock cam stock heads stock valvetrain. Its got a ported fast 102 on it. You may hear a little tap out the exhaust, i think its the torque tubes making that noise, i noticed it was alot louder when i first put the fast 102 on.

nocooler

iTrader: (5)

what tires are you running?

DoggyB22

iTrader: (2)

Nice pass man! Looks like you need to update your sig pass. But what gears do you have & have you put it on the dyno?

nmass399

Mickey thompson et streets bias ply's, there 26x11.50.

I have 4.11's, have not put it on the dyno, i might before i put on the heads and cam.

00blacka4

iTrader: (7)

really wanting to know what you gained with that ported fast as far as time goes....also who ported it....nice runs glad to see a fast on an SI car

nmass399

Not exactly sure how much it gained, i pulled 150 pounds out of the car and put the fast on at the same time. I am thinking that its around .1 to .15 of a second at most. My best before was the 11.80 at about the same d/a now the 11.5488 at the same track. I got the intake ported from vengeance racing, the port job on it looked really good.

00blacka4

iTrader: (7)

what about the butt dyno ? feel any faster ? do u think you lost anything above 4k ? ....how about some pics of that bad boy lol

nmass399

I really could not tell, it was really such a small difference with the weight taken out and then when i got the intake on. I think i gained above 4k, not sure how much tho. I think it would have done better not ported for a stock internal car. I got some pics i will post here tommorrow i will have to get them uploaded.

nmass399

Link to Fast 102 photo album in the top post

chrs1313

iTrader: (24)

congrats man there is more in it with some seat time...also if you werent powershifting there is another .1 or so

nmass399

I don't let off the throttle when i shift. Just push the clutch in the hair it will go and slam it into the next gear. Not sure what your talkin about?