11.54 stock internal 6 speed, video
#1
TECH Fanatic
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
http://www.youtube.com/watch?v=PmB9nZsG9VY
This was my 11.77 run where i spun like crazy still managed a 1.7 60 on that
Later on that night after getting in the lane that hooked i run a 11.5488 at 117 with a 1.58 60 ft. Raceweight should be around 3350.
http://www.streetfire.net/photo/2001970.htm
Here is a pic of my 2 best time slips. Gonna make a few adjustments and go back again this coming sunday and see if i can get it into the 11.4x's
Here is the photo album of the Fast 102
http://www.streetfire.net/photo/dsc00312jpg_2003072.htm
This was my 11.77 run where i spun like crazy still managed a 1.7 60 on that
Later on that night after getting in the lane that hooked i run a 11.5488 at 117 with a 1.58 60 ft. Raceweight should be around 3350.
http://www.streetfire.net/photo/2001970.htm
Here is a pic of my 2 best time slips. Gonna make a few adjustments and go back again this coming sunday and see if i can get it into the 11.4x's
Here is the photo album of the Fast 102
http://www.streetfire.net/photo/dsc00312jpg_2003072.htm
Last edited by nmass399; 02-24-2011 at 04:28 PM.
#2
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Awsome running car, to bad you didnt catch a vid of the 11.5 cause i bet she took off hard. 1-7/8 headers and duel 3in open exhaust is crazy for an all stock motor but its work damm good for you. Theres 10s in that car with just a cam for shur..
#4
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Nice Launch and driving for sure
Say hows that monster clutch working out ?
And does it have good enough manners for the street ?
Also Which Package did you buy 2 or 3 ? steel flywheel/ Or Aluminum
Say hows that monster clutch working out ?
And does it have good enough manners for the street ?
Also Which Package did you buy 2 or 3 ? steel flywheel/ Or Aluminum
Last edited by vette0009; 02-21-2011 at 09:27 PM.
#5
TECH Fanatic
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks guys, the monster clutch is good, i got the stage 3 with the chromeoly flywheel. Its very street friendly but it does make a little bit of a squealing noise if you slip it every now and then but it does not bother me.
Trending Topics
#10
TECH Fanatic
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Its open headers with torque tubes(collector extensions). Stock cam stock heads stock valvetrain. Its got a ported fast 102 on it. You may hear a little tap out the exhaust, i think its the torque tubes making that noise, i noticed it was alot louder when i first put the fast 102 on.
#13
TECH Fanatic
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Mickey thompson et streets bias ply's, there 26x11.50.
I have 4.11's, have not put it on the dyno, i might before i put on the heads and cam.
I have 4.11's, have not put it on the dyno, i might before i put on the heads and cam.
#15
TECH Fanatic
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Not exactly sure how much it gained, i pulled 150 pounds out of the car and put the fast on at the same time. I am thinking that its around .1 to .15 of a second at most. My best before was the 11.80 at about the same d/a now the 11.5488 at the same track. I got the intake ported from vengeance racing, the port job on it looked really good.
#17
TECH Fanatic
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I really could not tell, it was really such a small difference with the weight taken out and then when i got the intake on. I think i gained above 4k, not sure how much tho. I think it would have done better not ported for a stock internal car. I got some pics i will post here tommorrow i will have to get them uploaded.
#20
TECH Fanatic
Thread Starter