John Deere racer

iTrader: (13)

Ditto....
I was thinking my new set up should run low 10s also

vetteboy2k

iTrader: (5)

To the OP: There are several stock bottom end vettes that have gone high nines with power adders but my favorite is the one mentioned above. lol

StangEaterSS

iTrader: (41)

i'm not concerned with vettes. If my car weighed 3100lbs like a z06 i would be easily in the 9's. I said SBE 6-speed f-bodys.

vetteboy2k

iTrader: (5)

9's are never easy.
Goodluck with it.

buzz12586

iTrader: (17)

What color?

StangEaterSS

iTrader: (41)

out of the guys on the list, i messaged the 9 sec guys. there were 4 i belive that said 346ci. all of them have now responded and all have said they had forged rods and pistons. some were spraying as much as 225 shot. the fastest car on the list faster than my time was 10.04. he had a 100% stock motor with cam and spray. now i'm curious who has went in the 9's but never was added to that list, because there are no cars in the 9's with a stock bottom end on that list.

studderin

iTrader: (28)

what list?

midwestjunk

iTrader: (2)

There is a fastest 6-speed list in the manual transmission forum I belive.

Killer5.3

iTrader: (1)

Had an 01 formula 6 speed with LS6 intake,ported 241 heads, medium xe grind cam (i think 226/230@.050, slp longtubes and high flo cats, 9in w/ 3.89 gears. Car weighed 3550 lbs with my son in it. On a 150 nozzle kit it went 10.64 @132 w/ 1.65 60 ft. Track was not prepped good that day and the only suspension mods were lca and torque arm. Anti -roll and some good adjustable shocks would have help in the 60 ft department I'm sure. and never went back to track before I sold the car. The trap speed was there to run some 10.30's at least with a good 60 ft. Maybe with some weight reduction and 200 shot it would have been in the 9's. So yea it is definitely possible. Good luck with your combo

chrs1313

iTrader: (24)

mid 9s is very attainable with a stock bottom end ls1, m6 on a shot...

98blueSScamaro

iTrader: (14)

what this guy said.

DEFYANT

Did a Google search and noticed this thread, any insight to this?

Wondering what the fastest H/C/I + Spray F-Body is, stock shortblock of course.