10.66 in a LSX S-10.
#1
10.66 in a LSX S-10. With Video!
Hey Guys, just wanted to share a pass I made before the snow hit the ground here.
THE VIDEO!
Truck is a 2002 S-10 Xtreme
Originally a 2.2L 5speed.
Now a 370Cube Iron Block
Dimond forged pistons
Patriot heads
Mild 22X/23x 112lsa cam
4L60E w/ Yank 4000
Currie 9"
275/60/15 drag radials.
Progressive 200 Shot.
Some pics
THE VIDEO!
Truck is a 2002 S-10 Xtreme
Originally a 2.2L 5speed.
Now a 370Cube Iron Block
Dimond forged pistons
Patriot heads
Mild 22X/23x 112lsa cam
4L60E w/ Yank 4000
Currie 9"
275/60/15 drag radials.
Progressive 200 Shot.
Some pics
Last edited by Black X; 02-15-2008 at 12:19 PM.
#5
Very cool, says in his video... 3800 lb raceweight. I have an 00 sonoma 2.2l that is itching for my extra ls1. I was under the impression that these trucks were a little lighter than that, but still thats about an f-body weight, not too bad. What does the truck run off the spray? How streetable is the truck? Very cool!
__________________
Featuring 6 different turbo kits for your F-body!
Check us out on Facebook at: www.facebook.com/HuronSpeed
Featuring 6 different turbo kits for your F-body!
Check us out on Facebook at: www.facebook.com/HuronSpeed
#7
Very cool, says in his video... 3800 lb raceweight. I have an 00 sonoma 2.2l that is itching for my extra ls1. I was under the impression that these trucks were a little lighter than that, but still thats about an f-body weight, not too bad. What does the truck run off the spray? How streetable is the truck? Very cool!
Last edited by Black X; 02-15-2008 at 09:15 AM.
Trending Topics
#9
.
You did an excellent job at engineering that thing. How long did it take to put that monster in there.
How many changes did you make? You must destroy punks on the highway.
.
You did an excellent job at engineering that thing. How long did it take to put that monster in there.
How many changes did you make? You must destroy punks on the highway.
.
#10
The original Swap began Nov 1,2005 and was completed and on the road April 1,2006 at the time the truck only had 36,000kms (roughly 20,000miles) on it. The original swap was a cam only 5.3L with the bottle and a stock 60E with a shift kit. It netted a best of 11.27@123mph on a 200Shot and the Numbers in my very outsdated sig. The 200 shot was a little much for the 3-4clutches in the 60E and it began to slip.
Over the winter months Nov 2006, to April 2007. I built a new Iron 370 Cube motor and went front to back on the 4L60E with the help of Chuck and Vince at FLT. Also installed the Currie Enterprised 9+ with nodular case.
Since April 1,2007 the Truck has made 185 quarter mile passes, 8000 Street Miles many of which happend on 4-5hour road trips to Various tracks in western Canada.
The truck will deffinatly surprise quite a few people, there is a small warning on the plate.
This picture was taken in route to a dragstrip 350Miles from home... The truck has never been on a trailer and I am hoping it stays that way.
#18