1SC stripper build
#341
Bought another PCM to tune with the new engine. When I sell the current engine in the car, I am letting the Tuned PCM go with it. Letting the engine builder get the rest of what is needed. So, now it will be the waiting game. The Engine builder: http://nutterracingengines.com/
Last edited by Heyfred; 01-29-2018 at 09:59 PM.
#346
Was able to get three pulls before an issue arose on dyno. The issue is and believe the term used was “Steady State”. Ended up pulling the servo off and sending it out for repair. Here is what I can tell you so far. 91octane, 14 degrees of timing and we only spun the engine 5200rpm. 530hp, 489tq. Servo should be back from repair towards the end of next week.
#354
Project being delayed due to issues with the new engine, not being what I paid for. Parts not as stated, poor assembly and waiting a year only to be disappointed by the major mistakes I noticed and brought to Engine builder attention. Looks like I will be doing as usual, if I want it done right, I will have to do it myself.
Update:1-31-2019. Engine is gone. Talking with 2 engine builders. Moving forward and stepping up the game on the next build.
Update:1-31-2019. Engine is gone. Talking with 2 engine builders. Moving forward and stepping up the game on the next build.
Last edited by Heyfred; 01-31-2019 at 07:26 PM. Reason: Update