Ypipe to bullet then dumped
#42
FormerVendor
iTrader: (6)
Join Date: Nov 2007
Location: Glenolden, PA
Posts: 1,593
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I dont think they are quite as loud as the dynamax or loudmouth and not nearly as raspy. They do have an odd design. Its like part chambered, part perforated tube like the bullet.
#46
FormerVendor
iTrader: (6)
Join Date: Nov 2007
Location: Glenolden, PA
Posts: 1,593
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ya i know which one, maybe it was just the pictures of it, but the casing looked like it was more then 4 inches. Looked like it would make contact with the driveshaft and floor board. Looking at summit it does say 4", must just be a deceiving picture.
#57
TECH Apprentice
iTrader: (2)
Join Date: Nov 2007
Location: Delaware, OH
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
After the first couple weeks you'll want to get down there and retighten all the clamps like you would a normal exhaust. Unless your welding it of course.
#58
TECH Senior Member
iTrader: (10)
Join Date: May 2005
Location: Bossier city,LA barksdale AFB
Posts: 5,353
Likes: 0
Received 2 Likes
on
2 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It's not really visible unless your about 2 feet off the ground looking for it. You can tuck it up pretty nicely. Also turn your dump about 45 degrees toward the passenger side so that way the sound isn't bouncing directly off the pavement.
After the first couple weeks you'll want to get down there and retighten all the clamps like you would a normal exhaust. Unless your welding it of course.
After the first couple weeks you'll want to get down there and retighten all the clamps like you would a normal exhaust. Unless your welding it of course.
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
![Chug! Chug! Chug!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_chug.gif)
#60
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well I just picked the car up. I waited to get a piece of pipe welded to have the muffler sit right at the rear axle.
The car is definitely louder. Cold start up made me smile. Cam lope is a lot more noticeable. It has a nice deep, "muscle car" tone to it now. The rest of my exhaust is QTP long tube headers and a Kook's 3" ORY. There is a slight rasp around 2,500 rpms but it goes away quickly. You just learn to get through that rpm range quick. I haven't really gotten on the car too much yet but above 3k rpms the car really wakes up and makes noise. Cruising around town under 3k rpms it sounds like a normal muscle car with exhaust. You can't even see the muffler from the side of the car either. I consider it money well spent.
Now for the pics:
![](http://img.photobucket.com/albums/v735/andydpa/Bullet%20muffler/IMG_0625.jpg)
![](http://img.photobucket.com/albums/v735/andydpa/Bullet%20muffler/IMG_0626.jpg)
![](http://img.photobucket.com/albums/v735/andydpa/Bullet%20muffler/IMG_0628.jpg)
![](http://img.photobucket.com/albums/v735/andydpa/Bullet%20muffler/IMG_0629.jpg)
![](http://img.photobucket.com/albums/v735/andydpa/Bullet%20muffler/IMG_0631.jpg)
![](http://img.photobucket.com/albums/v735/andydpa/Bullet%20muffler/IMG_0632.jpg)
Added a video!
http://www.youtube.com/watch?v=NbLSvTIni-8
Exhaust is a lot deeper in person. A little point and shoot camera doesn't have the best microphone in the world. Haha.
The car is definitely louder. Cold start up made me smile. Cam lope is a lot more noticeable. It has a nice deep, "muscle car" tone to it now. The rest of my exhaust is QTP long tube headers and a Kook's 3" ORY. There is a slight rasp around 2,500 rpms but it goes away quickly. You just learn to get through that rpm range quick. I haven't really gotten on the car too much yet but above 3k rpms the car really wakes up and makes noise. Cruising around town under 3k rpms it sounds like a normal muscle car with exhaust. You can't even see the muffler from the side of the car either. I consider it money well spent.
Now for the pics:
![](http://img.photobucket.com/albums/v735/andydpa/Bullet%20muffler/IMG_0625.jpg)
![](http://img.photobucket.com/albums/v735/andydpa/Bullet%20muffler/IMG_0626.jpg)
![](http://img.photobucket.com/albums/v735/andydpa/Bullet%20muffler/IMG_0628.jpg)
![](http://img.photobucket.com/albums/v735/andydpa/Bullet%20muffler/IMG_0629.jpg)
![](http://img.photobucket.com/albums/v735/andydpa/Bullet%20muffler/IMG_0631.jpg)
![](http://img.photobucket.com/albums/v735/andydpa/Bullet%20muffler/IMG_0632.jpg)
Added a video!
http://www.youtube.com/watch?v=NbLSvTIni-8
Exhaust is a lot deeper in person. A little point and shoot camera doesn't have the best microphone in the world. Haha.
Last edited by White.Lightning; 06-06-2009 at 03:39 PM.