How to hit 11s with bolt ons
#24
get a cutout, and UD pulley (got mine used for 100 shipped), add some sort of ram air (either FTRA, SSRA, or Sux2BU style), gears are a waste of time and money on the 10 bolt, it only makes them weaker, 3.23 is plently with that converter...look at my times for proof...
also i shifting mine a 6200-6300 cant remember which...5900 is kind of low...good luck
also i shifting mine a 6200-6300 cant remember which...5900 is kind of low...good luck
#27
Alright went to put street tires on and a wheel stud broke off. Managed to get that fixed in time to make it to the track. Ran better with street tires than I did with the vig 3200 and ET streets. Car would hit the limiter on the 2-3 shift. With tires and a tune im feeling pretty confident I'll be low 12s.
60 - 1.84
1/8- 8.10 @ 86.24
1/4- 12.64 @ 108.17
60 - 1.84
1/8- 8.10 @ 86.24
1/4- 12.64 @ 108.17
#28
TECH Senior Member
iTrader: (71)
Alright went to put street tires on and a wheel stud broke off. Managed to get that fixed in time to make it to the track. Ran better with street tires than I did with the vig 3200 and ET streets. Car would hit the limiter on the 2-3 shift. With tires and a tune im feeling pretty confident I'll be low 12s.
60 - 1.84
1/8- 8.10 @ 86.24
1/4- 12.64 @ 108.17
60 - 1.84
1/8- 8.10 @ 86.24
1/4- 12.64 @ 108.17
#29
TECH Regular
iTrader: (1)
Join Date: Nov 2007
Location: oviedo, FL
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
Damn threads like this **** me off aha I can't get into the 12s to save my life. Best today was 1/8 only and went 8.6 at 87 mph on a 2.0 60' did beat a cam only vette tho. Only a 220 cam tho.
#32
TECH Senior Member
iTrader: (71)
i had a buddy the other day tell me at the track no way in hell he would consider an a4... i told him i like going fast.. he kinda laughed and said his is fast.
his is a stone stock 02 ws6.. he was running low 9s.. girl friends close to stock car was running low 8s...
he was not happy!
#33
10 Second Club
iTrader: (3)
Like PSJ said, increase the shifts up to 61-6200, and lose some weight. Then practice and feel how the car wants to be launched. That will cut your 60' down. My car won't do anything stabbing it from anywhere near idle. I have to load up on it to the point it wants to push past the brakes.
#34
Im still on stock valve springs, I might try 6000. I will try different lauch rpms once I get another Et street.
Weight wise, theres not to much more I am willing to loose that I can think of. Ac works so that is staying, have the front sway bar off, heat shields arent very much, dont want bumpers to sag so the support is staying for now.
Weight wise, theres not to much more I am willing to loose that I can think of. Ac works so that is staying, have the front sway bar off, heat shields arent very much, dont want bumpers to sag so the support is staying for now.
#35
Im still on stock valve springs, I might try 6000. I will try different lauch rpms once I get another Et street.
Weight wise, theres not to much more I am willing to loose that I can think of. Ac works so that is staying, have the front sway bar off, heat shields arent very much, dont want bumpers to sag so the support is staying for now.
Weight wise, theres not to much more I am willing to loose that I can think of. Ac works so that is staying, have the front sway bar off, heat shields arent very much, dont want bumpers to sag so the support is staying for now.
#36
On The Tree
Join Date: Mar 2002
Location: Northern Kentucky
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
TA1364, it doesn't take a whole lot to put one of these cars in the 11s. You really don't need to pull a ton of weight or even have all the bolt-ons. I'm still on completely stock internals and shifting mine at 6,100 with no signs of valve float on the dyno.
I'm running:
Whisper lid
Home ported TB
Stainless Works 1 3/4" longtubes
3" true duals w/x-pipe over the axle with Moroso Spiral Flows
Tracey Scott speed density tune
Edge 3,400 stall converter
4.10s in the stock 10-bolt
LCAs, brackets, BMR crossmember mounted torque arm, QA1s up front, and Wolfe single rear sway bar
Stock 16" wheels with ET Street radials out back
Race weight is 3,550 lbs
Best run:
60': 1.52
1/8 ET: 7.56
1/8 MPH: 89
1/4 ET: 11.93
1/4 MPH: 110.90
This time was BEFORE tuning and with the converter unlocked. I picked up 15-20 HP at the wheels across the board with tuning. I can't wait to see what it does with the tuning finished and some better weather. I may also be sending my converter back to Edge to get a restall since this one was configured more for street than strip.
You can find more details on my car at www.nkyfba.com. I'm in Northern Kentucky, not too far from you.
I'm running:
Whisper lid
Home ported TB
Stainless Works 1 3/4" longtubes
3" true duals w/x-pipe over the axle with Moroso Spiral Flows
Tracey Scott speed density tune
Edge 3,400 stall converter
4.10s in the stock 10-bolt
LCAs, brackets, BMR crossmember mounted torque arm, QA1s up front, and Wolfe single rear sway bar
Stock 16" wheels with ET Street radials out back
Race weight is 3,550 lbs
Best run:
60': 1.52
1/8 ET: 7.56
1/8 MPH: 89
1/4 ET: 11.93
1/4 MPH: 110.90
This time was BEFORE tuning and with the converter unlocked. I picked up 15-20 HP at the wheels across the board with tuning. I can't wait to see what it does with the tuning finished and some better weather. I may also be sending my converter back to Edge to get a restall since this one was configured more for street than strip.
You can find more details on my car at www.nkyfba.com. I'm in Northern Kentucky, not too far from you.
#38
On The Tree
Join Date: Mar 2002
Location: Northern Kentucky
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, you'll hear all kinds of horror stories about Precision's tuning. Tracey is the only person I'll allow to touch any of my cars. He's been tuning my **** since I got tired of LS1 Edit several years ago and I couldn't be happier.
If you're wanting to get some tuning done, just take it to him first and save yourself the headache. I'll guarantee it will be more driveable and make more power than what Precision will do for you.
If you're wanting to get some tuning done, just take it to him first and save yourself the headache. I'll guarantee it will be more driveable and make more power than what Precision will do for you.