My Extreme WEIGHT REDUCTION list & questions inside.....
#42
12 Second Club
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
a rollover? that piece is thin gauge sheet metal mainly only meant to hold the qtr panel speakers. not support. the metal pieces behind the speaker panel metal (which are visible in my pic) are alot thicker and are actually meant for support. and of course, those are not coming out
#43
12 Second Club
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
anyone wanna help me remove my wipers/wiper motor? i tried the sticky but the pics wont display on my comp for some reason. pics would be helpful
the motor looks far back there and that is where im stumped
the motor looks far back there and that is where im stumped
#44
12 Second Club
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
here are some pics from just a sec ago:
![](https://ls1tech.com/forums/picture.php?albumid=12365&pictureid=42199)
a view behind my dash. pretty empty
![](https://ls1tech.com/forums/picture.php?albumid=12365&pictureid=42198)
current interior pic
![](https://ls1tech.com/forums/picture.php?albumid=12365&pictureid=42197)
another straight-thru dash pic
![](https://ls1tech.com/forums/picture.php?albumid=12365&pictureid=42194)
removed airdam bracket
![](https://ls1tech.com/forums/picture.php?albumid=12365&pictureid=42196)
no bumper support, condensor, plastic or hood latch assembly
a view behind my dash. pretty empty
current interior pic
another straight-thru dash pic
removed airdam bracket
no bumper support, condensor, plastic or hood latch assembly
#46
TECH Regular
Join Date: Jun 2009
Location: Victoria - Vancouver Island, BC, Canada
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
#47
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
For the fuel Evac system just unbolt the back driver's side wheel well and you will see the charcoal canister. Its hooked onto a sliding clip like peice of metal and you can tug up on the canister and it will come off. Then I removed the evap line under the car and followed it up to the plastic line to the Evap soleniod. I then removed the solenoid and used a ALLEN plug to put in place of the vacumm nipple where evap solenoid came off the intake.
I forget what it weighed I think about 7 lbs from solenoid/metal fuel line/canister. The breather hose that comes from the gas tank I zip tied a nitro methane RC car foam airfilter from the hobby shop as they withstand harsh fuel very well. You will smell a little gas if you fill the tank up all the way but if your like me I just ran a quarter tank allways for weight loss.
Im now using a 8 gallon aluminum fuel cell with a 250gph BG pump for a carb and plate kit so I no longer deal with any of this.
I forget what it weighed I think about 7 lbs from solenoid/metal fuel line/canister. The breather hose that comes from the gas tank I zip tied a nitro methane RC car foam airfilter from the hobby shop as they withstand harsh fuel very well. You will smell a little gas if you fill the tank up all the way but if your like me I just ran a quarter tank allways for weight loss.
Im now using a 8 gallon aluminum fuel cell with a 250gph BG pump for a carb and plate kit so I no longer deal with any of this.