Anything you guys/gals want to see brought to the market?
#1
Anything you guys/gals want to see brought to the market?
We've been in business about 3 years now and focused mainly on appearance stuff but due to the size we've grown to we have the capabilities to bring new stuff to the market in this arena as well.
Now, let me me tell you what we're capable of and you all tell me where we might be of service (it is not like were going to offer new pistons or rear ends, etc...)...
Anything you want out of Fiberglass or Carbon Fiber (we already offer a light weight t-top replacement)
Anything that can be fabbed out of metal (we already make seat brackets for racing seats, harness bars, etc...)
Anything that can be water jet cut or lathed (we already make C5 Conversion brackets that do not require cutting of your spindle and have been track proven for about 2 years now with NO failures)
Anything involving your gauges (for the fancy racer we offer 200mph gauge overlays and calibration and we can make overlays for any gauges, auto meter, etc...)
Etc...
We're not really looking to make products already offered (LCAs, relocation brackets, roll cages, etc...) we're just looking for any product that is not currently offered that you would like to see offered. Thanks for your time !
Now, let me me tell you what we're capable of and you all tell me where we might be of service (it is not like were going to offer new pistons or rear ends, etc...)...
Anything you want out of Fiberglass or Carbon Fiber (we already offer a light weight t-top replacement)
Anything that can be fabbed out of metal (we already make seat brackets for racing seats, harness bars, etc...)
Anything that can be water jet cut or lathed (we already make C5 Conversion brackets that do not require cutting of your spindle and have been track proven for about 2 years now with NO failures)
Anything involving your gauges (for the fancy racer we offer 200mph gauge overlays and calibration and we can make overlays for any gauges, auto meter, etc...)
Etc...
We're not really looking to make products already offered (LCAs, relocation brackets, roll cages, etc...) we're just looking for any product that is not currently offered that you would like to see offered. Thanks for your time !
#2
Like this;
You could offer different layouts?
#3
^^Already make it, just forgot to ever post it, lol! What I have made is a blank piece of ABS that you would:
1) Pull out your gauge cluster...
2) Remove your gauge face and the plastic piece the stock gauges are mounted to (just pulls off)...
3) Remove any material needed (the circuit board) to make room for whatever gauges you picked...
4) Bolt our piece in place (lines up with all the bolt holes and guide pegs the factory piece used...
Right now it is just a blank piece, haven't decided what the best/most popular gauge hole configuration would be...
I'd sell for like $40-$50 shipped (blank or with a hole design we come up with, custom would be more) depending on what the machine ends up telling me (waterjet machine calculates time it spends, material, etc... to tell you what your cost in the piece is).
Who wants the first blank piece for $30 shipped to install and take some pics for me?
1) Pull out your gauge cluster...
2) Remove your gauge face and the plastic piece the stock gauges are mounted to (just pulls off)...
3) Remove any material needed (the circuit board) to make room for whatever gauges you picked...
4) Bolt our piece in place (lines up with all the bolt holes and guide pegs the factory piece used...
Right now it is just a blank piece, haven't decided what the best/most popular gauge hole configuration would be...
I'd sell for like $40-$50 shipped (blank or with a hole design we come up with, custom would be more) depending on what the machine ends up telling me (waterjet machine calculates time it spends, material, etc... to tell you what your cost in the piece is).
Who wants the first blank piece for $30 shipped to install and take some pics for me?
#6
Trending Topics
#13
TECH Fanatic
iTrader: (29)
A stylish bulkhead for the rear Maybe with a chevy bowtie or camaro emblem pressed in the sheet metal or whatever the firebird guys like. A/C control and radio delete panel in something other than cheap plastic. Alum would be very nice. Fog light block offs for camaros and firebirds, and also a front grille inlet block off for firebirds and camaros. Just some ideas that I have seen people ask about.
You guys make great stuff. Just throwin that in.
You guys make great stuff. Just throwin that in.
#17
#19
11 Second Club
iTrader: (6)
the leather on my 17 year old steering wheel looks like crap. maybe u could do something for that? leather wraped t-handle 6 speed shifter? get replacement weatherstriping that doesnt cost $150 a door? led 3rd brake light for ta? maybe something to make a roll bar bar more daily driver friendly like an arm rest or extra thick padding?