10 second stock internal car ?????.....getting closer?
#41
I write checks with my mouth that my ass can't cash
Thread Starter
iTrader: (7)
Join Date: Oct 2009
Posts: 948
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
why change it when i think it can be done with this stall/gear/tire....my buddy runs 10.2 on a 75 shot with a 3600 stall...3.73 gear and 26 in. tire with his heads cam....
One thing im really worried about is the fast 102 hurting me...some people should chime in and make me feel better haha
One thing im really worried about is the fast 102 hurting me...some people should chime in and make me feel better haha
#42
12 Second Club
iTrader: (9)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
why change it when i think it can be done with this stall/gear/tire....my buddy runs 10.2 on a 75 shot with a 3600 stall...3.73 gear and 26 in. tire with his heads cam....
One thing im really worried about is the fast 102 hurting me...some people should chime in and make me feel better haha
One thing im really worried about is the fast 102 hurting me...some people should chime in and make me feel better haha
also your buddy has you by about 120rwhp-160rwhp depending on h/c.
i dont think the fast is gonna hurt your times,do a dyno test and none of us wont have to worry,ls6 vs fast being only changes
if you hit 10s with 3.73 and 26" tire than great cause that means i to can get real close.we dont get great da down here about as good as its gonna get is -100 and thats real effin cold for us southern boys
#43
I write checks with my mouth that my ass can't cash
Thread Starter
iTrader: (7)
Join Date: Oct 2009
Posts: 948
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
yeah we get some awesome DA...i think my raceweight will have to be around 2850 to hit tens to be honest...but we will see what happens...its gunna be haulin for a stock motor car thats for sure
#44
Race your car!
iTrader: (50)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'd personally shitcan the yank converter and call ati, fti or ultimate converter concepts and have a 4800 8 inch converter built.
I bet it would pick up .2 in the 1/4 over a shelf yank converter, fwiw.
4.30 gears and a 28 inch tire would do alot for your cause as well... or at least 4.10's if you must stick with the 26.
I bet it would pick up .2 in the 1/4 over a shelf yank converter, fwiw.
4.30 gears and a 28 inch tire would do alot for your cause as well... or at least 4.10's if you must stick with the 26.
#45
I write checks with my mouth that my ass can't cash
Thread Starter
iTrader: (7)
Join Date: Oct 2009
Posts: 948
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
check out the picture of that gastank brace on the last page i was talking about JL, tell me if this has anything to do with the cars structure or if i can take it out...
#46
Race your car!
iTrader: (50)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I use that piece to rout the brake lines on when I delete the abs.. this way the brake lines are on the body, and if ou need to pull the rear you can and just unbolt the calipers and hang them in the fenders... no need to deal with cracking a brake line that way.
You can take it out if you want, I don't think that's doing a whole lot. Or, if you want just cut it off and leave the metal where it's doubling up the thickness of the sheet metal. Or, use a uni bit and punch alot of holes in it, if you don't want to take it out.
You can take it out if you want, I don't think that's doing a whole lot. Or, if you want just cut it off and leave the metal where it's doubling up the thickness of the sheet metal. Or, use a uni bit and punch alot of holes in it, if you don't want to take it out.
#48
LS1TECH Sponsor
iTrader: (3)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'd personally shitcan the yank converter and call ati, fti or ultimate converter concepts and have a 4800 8 inch converter built.
I bet it would pick up .2 in the 1/4 over a shelf yank converter, fwiw.
4.30 gears and a 28 inch tire would do alot for your cause as well... or at least 4.10's if you must stick with the 26.
I bet it would pick up .2 in the 1/4 over a shelf yank converter, fwiw.
4.30 gears and a 28 inch tire would do alot for your cause as well... or at least 4.10's if you must stick with the 26.
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
__________________
95 Pontiac Formula- Stock engine with ATI Procharger, Moser 12 bolt w/4:30 gears, Rossler trans, Neil Chance 4000 stall, M/T ET streets, 10.914@ 121.90mph, 1.452 60ft. GMHTP November 2010 Feature Car. Check it out at:
https://www.motortrend.com/features/...ebird-formula/
http://www.youtube.com/watch?v=abZ1z...ature=youtu.be
95 Pontiac Formula- Stock engine with ATI Procharger, Moser 12 bolt w/4:30 gears, Rossler trans, Neil Chance 4000 stall, M/T ET streets, 10.914@ 121.90mph, 1.452 60ft. GMHTP November 2010 Feature Car. Check it out at:
https://www.motortrend.com/features/...ebird-formula/
http://www.youtube.com/watch?v=abZ1z...ature=youtu.be
Last edited by Jon@BruteSpeed; 04-30-2011 at 07:43 AM. Reason: tac
#49
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'd personally shitcan the yank converter and call ati, fti or ultimate converter concepts and have a 4800 8 inch converter built.
I bet it would pick up .2 in the 1/4 over a shelf yank converter, fwiw.
4.30 gears and a 28 inch tire would do alot for your cause as well... or at least 4.10's if you must stick with the 26.
I bet it would pick up .2 in the 1/4 over a shelf yank converter, fwiw.
4.30 gears and a 28 inch tire would do alot for your cause as well... or at least 4.10's if you must stick with the 26.
#50
I write checks with my mouth that my ass can't cash
Thread Starter
iTrader: (7)
Join Date: Oct 2009
Posts: 948
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
man none of you guys are fond of yank...with no suspension, 3400lb raceweight and bolt ons it got me a 1.54 and still trapped 113...at 11.7...and chrs1313 runs a yank and pulls a 1.29 60 for example
#51
10 Second Club
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yank SS4000 has gone 1.29 60 ft fellas in Chris1313 heads and cam car. 1.54 is not bad for the weight and hp level your at.That same converter will shine even more with more hp.Its the only piece still on Chris car over the past 3 years or so, and we have tested others out with no gain.Its hits HARD and is very effecient on top.
#52
LS1TECH Sponsor
iTrader: (3)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Running 11.7's, I think you should be trapping mid 115's. What's your RPM through the traps? We see a lot of cars on the dyno blowing through their converters and not getting their potential to the ground.
Jon
__________________
95 Pontiac Formula- Stock engine with ATI Procharger, Moser 12 bolt w/4:30 gears, Rossler trans, Neil Chance 4000 stall, M/T ET streets, 10.914@ 121.90mph, 1.452 60ft. GMHTP November 2010 Feature Car. Check it out at:
https://www.motortrend.com/features/...ebird-formula/
http://www.youtube.com/watch?v=abZ1z...ature=youtu.be
95 Pontiac Formula- Stock engine with ATI Procharger, Moser 12 bolt w/4:30 gears, Rossler trans, Neil Chance 4000 stall, M/T ET streets, 10.914@ 121.90mph, 1.452 60ft. GMHTP November 2010 Feature Car. Check it out at:
https://www.motortrend.com/features/...ebird-formula/
http://www.youtube.com/watch?v=abZ1z...ature=youtu.be
#53
I write checks with my mouth that my ass can't cash
Thread Starter
iTrader: (7)
Join Date: Oct 2009
Posts: 948
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
man i have no idea what rpm's through the traps the car basically got finished on sunday, tuned on monday, and ran on Friday at midnight madness where i had no time to play with anything and my tuner wasent there, only got 2 runs....all i know is i think my shift points need work it shifts on the 1-2 at 6050 and 2-3 at 6200.....i think the 1-2 is way low but PLEASE give me some pointers
#54
Race your car!
iTrader: (50)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yank SS4000 has gone 1.29 60 ft fellas in Chris1313 heads and cam car. 1.54 is not bad for the weight and hp level your at.That same converter will shine even more with more hp.Its the only piece still on Chris car over the past 3 years or so, and we have tested others out with no gain.Its hits HARD and is very effecient on top.
I know one guy, had a 4400 yank in his h/c car that was about 3200 lbs, and he picked up 5 mph and 6 tenth's pulling it out and going with an untimate converter.
60 foot didn't change more then 1/2 a tenth too... so again, just because a converter works in the first 60 feet doesn't mean it works anywhere else!
#55
I write checks with my mouth that my ass can't cash
Thread Starter
iTrader: (7)
Join Date: Oct 2009
Posts: 948
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
ahh damnit....now you got me worried about this converter...**** lol...iv seen several good things with the yank converters though
Also do you think my 113 mph is low ?
and do you think my 6050 1-2 and 6200 2-3 is way off ?
Thanks
Also do you think my 113 mph is low ?
and do you think my 6050 1-2 and 6200 2-3 is way off ?
Thanks
#57
I write checks with my mouth that my ass can't cash
Thread Starter
iTrader: (7)
Join Date: Oct 2009
Posts: 948
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
UPDATE: parts are showing up daily, got my shiney fuel rails today, talked to Tony and my intake and throttlebody are shipping out monday, ARH headers are hear (and pimp as hell might i add)
Also, ordered the KUP watervapor system so i dont have to block that stuff off which i really would hate to do
1 more thing added to the never ending list of hell, GZ vacuume pump
....it seems pricey but i honestly think it will help and i need to get my PCV off of their, dont want oil in my shiney new intake and deffinetly not in my combustion chamber....pics of everything comming soon
Also, ordered the KUP watervapor system so i dont have to block that stuff off which i really would hate to do
1 more thing added to the never ending list of hell, GZ vacuume pump
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)