couple of pics of Agent Orange with the rear axle narrowed 4.5 a side
04-24-2011, 04:24 PM
#1
Launching!
Thread Starter
iTrader: (5)
Join Date: Apr 2010
Location: Mi
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
couple of pics of Agent Orange with the rear axle narrowed 4.5 a side Agent Orange updates
Finally got the rearend back under the car ..new strange 35 spline axles and center ...rear i snarrowed 4.5 a side with weld Alumastar 2.0
15 x 10 witha 4" BS
heres a couple of pics the way she sits ...this is mockup the axle is coming back out for powder coat ...
Finally got the rearend back under the car ..new strange 35 spline axles and center ...rear i snarrowed 4.5 a side with weld Alumastar 2.0
15 x 10 witha 4" BS
heres a couple of pics the way she sits ...this is mockup the axle is coming back out for powder coat ...
Trending Topics
04-26-2011, 05:23 PM
#8
Launching!
Thread Starter
iTrader: (5)
Join Date: Apr 2010
Location: Mi
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
weight and to make room for sissy sticks ...its getting a chute mount ..so it was really just extra weight ...also planning on trimming the metal from the rear quarter area ...the bumper cover, covers it all anyways ..
04-26-2011, 10:21 PM
#11
Launching!
Thread Starter
iTrader: (5)
Join Date: Apr 2010
Location: Mi
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
thanks fellas ..its coming along ..but still a lot to do ..heres a pic of the bullet
its the one with the Jesel drive ..the other is the 468 out of my Chevelle ...it ran 10.65 @ 125 N/A @ 3700 lbs + driver ...
its the one with the Jesel drive ..the other is the 468 out of my Chevelle ...it ran 10.65 @ 125 N/A @ 3700 lbs + driver ...
04-27-2011, 10:13 AM
#15
Launching!
Thread Starter
iTrader: (5)
Join Date: Apr 2010
Location: Mi
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
GM bowtie block ..14.7 to 1 Je nitrous pistons , dart CNC 355 heads with 2.35 intake valve's 8.17 lift solid roller , edelbrock super Vic intake , plumbing it for a fogger , and running a big shot plate , Lunati crank , eagle rods with L-19 bolts ..hopin to make 950ish on the nuts and spray another 3 to 400 at it ...
