SS wannabe drag car progress!!!!
#247
10 Second Club
Thread Starter
iTrader: (27)
Join Date: Mar 2009
Location: Kissimmee, FL / Vienna, VA
Posts: 810
Likes: 0
Received 1 Like
on
1 Post
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I haven't updated in a while so I thought I'd share my recent progress.
Got my engine back (434" LSX, Mast PXR Heads, Diamond Pistons, GRP Rods, Bullet Cam, ATFSpeed Motorplate, ARE Dry Sump Pan):
![](http://i62.tinypic.com/34ih1t4.jpg)
Got my 2 speed TH400 and bolt-together converter from ATFSpeed:
![](http://i57.tinypic.com/2ylpfg2.jpg)
Got most of the electronics mounted to the dash bar (Holley Dominator, MSD Powergrid, and a Spaghetti Menders system):
![](http://i57.tinypic.com/2q179sn.jpg)
Starting to fit the Glasstek dash:
![](http://i57.tinypic.com/2vu0tmq.jpg)
Cut the cowl, made a new piece, fit the Optic Armor glass, and refit the dash to the new cowl piece:
![](http://i60.tinypic.com/raq9hk.jpg)
Starting on exhaust as soon as I get my dry sump pump back from Dailey Engineering:
Got my engine back (434" LSX, Mast PXR Heads, Diamond Pistons, GRP Rods, Bullet Cam, ATFSpeed Motorplate, ARE Dry Sump Pan):
![](http://i62.tinypic.com/34ih1t4.jpg)
Got my 2 speed TH400 and bolt-together converter from ATFSpeed:
![](http://i57.tinypic.com/2ylpfg2.jpg)
Got most of the electronics mounted to the dash bar (Holley Dominator, MSD Powergrid, and a Spaghetti Menders system):
![](http://i57.tinypic.com/2q179sn.jpg)
Starting to fit the Glasstek dash:
![](http://i57.tinypic.com/2vu0tmq.jpg)
Cut the cowl, made a new piece, fit the Optic Armor glass, and refit the dash to the new cowl piece:
![](http://i60.tinypic.com/raq9hk.jpg)
Starting on exhaust as soon as I get my dry sump pump back from Dailey Engineering:
![](http://i61.tinypic.com/2uh387k.jpg)