Race Mufflers
#1
Race Mufflers
I need some race mufflers.
Race only car. I don't like open headers, too loud for me.
I know it adds weight but.
Headers have 3.5" collectors. I had the Dynomax Bullets before and didn't like them. I had a Borla XR-1 on a ORY and like that sound. But I don't want to spend $350.00 on the XR-1's.
I'll have about 8" of straight pipe off the collectors and then the mufflers and turndowns.
Thanks
Race only car. I don't like open headers, too loud for me.
I know it adds weight but.
Headers have 3.5" collectors. I had the Dynomax Bullets before and didn't like them. I had a Borla XR-1 on a ORY and like that sound. But I don't want to spend $350.00 on the XR-1's.
I'll have about 8" of straight pipe off the collectors and then the mufflers and turndowns.
Thanks
#2
I use the Quicktime Performance Race Mufflers.
Here's a thread with pics and videos that someone started...
https://ls1tech.com/forums/generatio...vid-added.html
Here's a thread with pics and videos that someone started...
https://ls1tech.com/forums/generatio...vid-added.html
Last edited by Firehawk441; 07-08-2012 at 02:00 PM.
#3
10 Second Club
iTrader: (6)
Join Date: Aug 2006
Location: Kearney, NE
Posts: 643
Likes: 0
Received 0 Likes
on
0 Posts
DynaTech Splitflows!
Edit, those AR3 look like a splitflow copy with amazing sound!!
Anyone know what differents sizes you can get and how much they cost??
Edit, those AR3 look like a splitflow copy with amazing sound!!
Anyone know what differents sizes you can get and how much they cost??
Last edited by 06X6spdGTO; 07-08-2012 at 02:28 PM.
#6
Trending Topics
#8
8 Second Club
iTrader: (76)
Join Date: Jun 2004
Location: Goshen NY
Posts: 2,902
Likes: 0
Received 0 Likes
on
0 Posts
i use the quicktime performance race mufflers.
Here's a thread with pics and videos that someone started...
https://ls1tech.com/forums/generatio...vid-added.html
Here's a thread with pics and videos that someone started...
https://ls1tech.com/forums/generatio...vid-added.html
#10
10 Second Club
iTrader: (27)
Join Date: Mar 2009
Location: Kissimmee, FL / Vienna, VA
Posts: 810
Likes: 0
Received 1 Like
on
1 Post
It seemed to be the same amount of noise when switching from duals in front of the axle to mufflers on the headers. It was louder inside the car though but that's because the exhaust is right below your feet.
#14
TECH Senior Member
iTrader: (28)
if you want to quite it down, id get a case muffler, like the QTP, or a magnaflow 4x9.
Something light and cheap ($15 each) these work great. I know me and ATV racer use them, fits for class stuff. Dont make it any quieter in the car with them dumped, but cut down a little at idle, not much.
http://www.summitracing.com/search/B.../?autoview=SKU
http://youtu.be/ueoptQMQbmc
http://youtu.be/jRHCOCWtWX8
Something light and cheap ($15 each) these work great. I know me and ATV racer use them, fits for class stuff. Dont make it any quieter in the car with them dumped, but cut down a little at idle, not much.
http://www.summitracing.com/search/B.../?autoview=SKU
http://youtu.be/ueoptQMQbmc
http://youtu.be/jRHCOCWtWX8
Last edited by studderin; 07-09-2012 at 09:09 PM.
#16
10 Second Club
iTrader: (2)
I like my Flowmaster Outlaw race bullets. Flowmaster pays NMCA contingency, that was a main factor in my decision as to what to buy.
http://www.flowmastermufflers.com/se...fler&sc3=&sc4=
http://www.flowmastermufflers.com/se...fler&sc3=&sc4=
#19
TECH Senior Member
iTrader: (28)
ya there legal for LSX AM, and MIR were you just need to have a muffler, and no Db limit.
If anything JL you could make thous easy for 4, 4.5, 5, check out the pics of what they really are. Its just 10-20 spots somone hammerd a shape center puch thu the tubing, then there a 1/4 bigger secton of tubing thats kinda over that area There not even fully welded, they just have 2 tacks on one end the that outer cover doesn't fall off.
http://static.summitracing.com/globa.../SCH-63030.jpg
http://static.summitracing.com/globa...H-63030_IT.jpg
If you look on YB I think a few shops make somthing like them, if you want to buy somthing. I know the high end exhust places have them too, (burrs, SDP, staimless headers, vibrant) But not this cheap.
If anything JL you could make thous easy for 4, 4.5, 5, check out the pics of what they really are. Its just 10-20 spots somone hammerd a shape center puch thu the tubing, then there a 1/4 bigger secton of tubing thats kinda over that area There not even fully welded, they just have 2 tacks on one end the that outer cover doesn't fall off.
http://static.summitracing.com/globa.../SCH-63030.jpg
http://static.summitracing.com/globa...H-63030_IT.jpg
If you look on YB I think a few shops make somthing like them, if you want to buy somthing. I know the high end exhust places have them too, (burrs, SDP, staimless headers, vibrant) But not this cheap.
#20
TECH Senior Member
iTrader: (28)
Not to give to much away, but there dont cost much power, more accounting for the length of tubing they take up.
http://i2.photobucket.com/albums/y11...1223111915.jpg
pipemax
http://i2.photobucket.com/albums/y11...1223111915.jpg
pipemax
Last edited by studderin; 07-10-2012 at 10:14 PM.