how many guys run a 26 tire up front and 28s
#1
TECH Enthusiast
Thread Starter
iTrader: (11)
Join Date: Apr 2012
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
how many guys run a 26 tire up front and 28s
on the back?
does it hinder performance at all?
I know you can shallow stage more but what is the overall gain in this?
R u still running a speedometer with this setup?
Especially for the guys who are running a th400 setup and using the front abs sensor for speedometer!
thanks
does it hinder performance at all?
I know you can shallow stage more but what is the overall gain in this?
R u still running a speedometer with this setup?
Especially for the guys who are running a th400 setup and using the front abs sensor for speedometer!
thanks
#5
11 Second Club
Join Date: Jun 2008
Location: Sayre, PA
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
The 28s will be faster but I think they look too big. You may also have trouble hitting the tree depending on your setup. 26s are pretty much the standard front tire size.
#6
TECH Apprentice
iTrader: (1)
Join Date: Jul 2006
Location: Tampa, FL
Posts: 311
Likes: 0
Received 0 Likes
on
0 Posts
40 tooth reluctor and sensor.
Install reluctor in place of mechanical speedometer drive gear and sensor in place of driven gear/housing.
Cut off factory VSS plug and instal new pigtail (polarity doesn't matter).
If your car was originally equipped with a 4L60E no tuning will be necessary (except for rear gear changes and tire size changes). If your car was originally a 6-speed car then the PCM will need to be calibrated for the difference in VSS reluctor wheel tooth counts (17 teeth for manual vs. 40 teeth for auto).
Install reluctor in place of mechanical speedometer drive gear and sensor in place of driven gear/housing.
Cut off factory VSS plug and instal new pigtail (polarity doesn't matter).
If your car was originally equipped with a 4L60E no tuning will be necessary (except for rear gear changes and tire size changes). If your car was originally a 6-speed car then the PCM will need to be calibrated for the difference in VSS reluctor wheel tooth counts (17 teeth for manual vs. 40 teeth for auto).
Trending Topics
#15
#20