Taubr Unit

iTrader: (32)

Searched but came up with nothing specific. My car is a '94 with a ls motor, Vic jr intake, 2" spacer, 6061 elbow and NW tb. What cable should I buy? '94 cable, '02 cable? Will the 2" spacer make it too high for a stock size? Just too many variables for me to "wing it". Anybody have experience here? Thanks and heres my set-up...

dschmittie1

iTrader: (64)

I would just get an OEM throttle cable for a non TCS/ASR car. I don't have the 2 inch spacer on mine but I don't think that rasing it 2 inches would make my cable not reach

Taubr Unit

iTrader: (32)

Ok cool. Does it matter year? Being my car a lt1 car, is the gas pedal the same to a ls car?

dschmittie1

iTrader: (64)

Get an ls throttle cable. I will get the part number in a few min

dschmittie1

iTrader: (64)

GM part number 12565560

List price is $47.85 I can get it for about $34ish

dschmittie1

iTrader: (64)

Gas pedal should be the same. GM wouldn't spend the money to change that

y2k_ta

iTrader: (80)

Yes, the gas pedals are the same. I used the above-mentioned cable on my swap.

1mean96ss

Who makes an adjustable cable so that you can pull the slack out of it.....?

Taubr Unit

iTrader: (32)

Gonna bump this back up. Borrowed my buddy's throttle cable (12565560 as above) and its SUPER long. Like it runs under the cowl to pass side and back to tb. Looks like *** and I can't see a huge loop being any good for smooth action. Gm have anything shorter or a Lokar one in my future?

WhiteLTone

iTrader: (18)

ive read about using an s10 throttle cable. i just ordered the lokar universal 24" - seems good enough. was only like 45$

Cam72aro

iTrader: (28)

use the lokar cable for the an ls. I have used it on 2 cars and its cut to length. Its good quality and reasonable. I had to cut the end of the pedal and turn it 90 so the clevis would pivot correctly. Here is a link to it.

http://www.jegs.com/i/Lokar/625/TC-1000LS1/10002/-1

Taubr Unit

iTrader: (32)

Not too bad for $55. How does it get held to the fire wall?

deadhorse66

iTrader: (2)

I have a jegs on mine. Cut the sleeve and cable to length, bolts through the firewall with a bulkhead jamb nut. Guaranteed to fit! You'll have to weld a tab on the pedal because its a clevis attachment. 25 bucks and done.

Taubr Unit

iTrader: (32)

$25 for the cable?!

deadhorse66

iTrader: (2)

Yep. It's not pretty and braided like the lokar, just black laminate over a steel wound sleeve. It's clean and functional though.