Jason94z

iTrader: (3)

So an Ultra Bell can leak, and you still need a blanket...
what's the easiest way to pass tech that is not at PITA to install?

I was looking at this, will it fit in an fbody?

http://www.jegs.com/i/CSR/170/832/10...oductId=747511

What are you guys running?

Thank you

xpndbl3

iTrader: (23)

never had a leak on my ultra bell or in any of my buddies cars. Then just run a blanket or the drum shield.

Jason94z

iTrader: (3)

Nice
I ended up getting a CSI carbon that does both
It was the same as just the ultrabell would have been
Thanks guys

Blown06

iTrader: (32)

I use the csr shield, but I'm running a truck so there seems to be plenty of room. One thing that I did not like about it is that you have to run the vent line down, which limits you on vent tank mounting.

trans2000am

iTrader: (49)

i will be upgarding to the new case!!!! i get rid of all that extra ****, such a pain to get the trans mounted with the csr carbon shield on

dschmittie1

iTrader: (64)

I have a CSR shield on my Th400 Not too bad to install

Jason94z

iTrader: (3)

Well it turns out the CSR is out of stock everywhere...
So should I wait a few weeks or go with something else?

5.3LJimmy

iTrader: (10)

I would just do a blanket. I have the car shield on my th350 and it is a tight fit so I would imagine the th400 will be more difficult. The supershield is a really nice piece but it is just a pain to work around in an fbody.

Jason94z

iTrader: (3)

Will that take care of drum area and flexplate area? Which blanket is good? Thank you.

I guess if I go blanket I need to fix my little oil leak on the front that keeps everything "rust-proofed"

Slowhawk

iTrader: (12)

I've got one at the shop. Ordered 2 a year ago. 1 came in a few days, other showed up 4 months later.

Shoot us a call.

Jason94z

iTrader: (3)

Are they hard to get in with a jack and jack stands?

Since I don't need the fexplate shield until 9.99 I'm thinking of just going with a blanket. I'll never be in the 9's for years and years.

Or is the CSR not as bad to put in as google suggests? Should I still go for the extra safety of the full CSR?

Jason94z

iTrader: (3)

CSR is here
Does anyone know the bolt length I need now?
Thank you

trans2000am

iTrader: (49)

it should of came with bolts, believe they are 12 point bolts about 2 inches long

Jason94z

iTrader: (3)

Hmm I will check the box thanks!

Jason94z

iTrader: (3)

Yup they were under the Th400 I had to take the tranny off the skid to find them!

Yeah bonus nothing to measure now