dash pad and 10pt
Thread Starter
11 Second Club
iTrader: (16)
Joined: Feb 2006
Posts: 1,865
Likes: 0
From: Cape Girardeau, MO
dash pad and 10pt So I came up with the bright idea of leaving the dash pad in and fitting the bars that way.....AFTER I already welded the cage in 
Im guessing my next option is to section the dash pad because Im not seeing any other way to install it with the bars in there already. What has everyone else done to get it back in or were you guys with cages smart enough to have the pad in before the bars are put in?
Im guessing my next option is to section the dash pad because Im not seeing any other way to install it with the bars in there already. What has everyone else done to get it back in or were you guys with cages smart enough to have the pad in before the bars are put in? So I came up with the bright idea of leaving the dash pad in and fitting the bars that way.....AFTER I already welded the cage in Im guessing my next option is to section the dash pad because Im not seeing any other way to install it with the bars in there already. What has everyone else done to get it back in or were you guys with cages smart enough to have the pad in before the bars are put in?
Im guessing my next option is to section the dash pad because Im not seeing any other way to install it with the bars in there already. What has everyone else done to get it back in or were you guys with cages smart enough to have the pad in before the bars are put in? Thread Starter
11 Second Club
iTrader: (16)
Joined: Feb 2006
Posts: 1,865
Likes: 0
From: Cape Girardeau, MO
Were on the same page, I'll try that, I tried to bend it around to see if it would start to go in, I havnt notched it yet, but I'll give it a go now that I know it's a posibility. Thanks
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
^^^ Your cage probably fits the car tighter.
Removing the windshield is really the best way, but these extension panels are very prone for cracking. It really depends on how much sunlight the car has seen over the years.
Removing the windshield is really the best way, but these extension panels are very prone for cracking. It really depends on how much sunlight the car has seen over the years. Thread Starter
11 Second Club
iTrader: (16)
Joined: Feb 2006
Posts: 1,865
Likes: 0
From: Cape Girardeau, MO
yea, I don't think im going to be able to get my back in without cutting it or pulling the windshield. doubt I go through that much trouble though. Im thinking about cutting 6" to a 1' off on side, sliding it in and refastening it.