NRC-Motorsports

like it says ,is there anywhere ,where times are posted with the fastest head and cam N/A cars i just looked on data base thing here and it has juice cars,listed in it thnx bob ,is there a data base that list the wieght also

Bad Habit Bird

iTrader: (12)

I know I don't have a record with my runs but I went 11.2x's with a race weight of 3580. Just with stage I heads and a medium sized cam 228/232

bspz28

iTrader: (1)

I belive Jason99TA has gone 10.59 to hold the F-Body record. I have gone 10.69..

brent eb02

i have gone 10.52 @ 130 but im a corvette

SMOKIN01TA

iTrader: (10)

july '04 edition of HR magazine. 10.50@128mph '01 firebird formula
fastest head cam ls1 belongs to dave whitten

Roger White

Looks like its 10.50 for now.

NRC-Motorsports

whats the average wieght a few i know are real lite[by f body standards]@ 3000 lbs ,is that the norm

bspz28

iTrader: (1)

You can't always go by what magazines say. The owner of the car can say anything as far as ET goes. I am in GM High Tech Magazine (latest issue) and I did the Photoshoot back in October They did ask me what I ran before they let me make a few passes that day and I could have told them anything. My best before that day was an 10.91 and after making a few passes for them i've gone 10.77@ 127 mph.

What I am saying anyone can say they ran a great ET but does this guy have a time slip to back it up ???

I know I have my 10.69 slip and video. Brent has his 10.52 Slip and Jason99TA has his slip and maybe a video..

Red01Chevy

i saw jasons passes

JS

iTrader: (4)

Jason is the fastest,Get over it

PewterZ28

iTrader: (1)

I've never seen his car up close but I saved the video of RUQWIKR running 10.5x @ 128 mph. It was posted on this website. He also had the bolt on record at 11.2x @ 120 mph!

gator's 99TA

iTrader: (2)

i believe it is an AP Engineering car. i would highly doubt that RUQIKER would lie about his times and no one would call BS on it but you. he did run 11.2 bolton remember!

NRC-Motorsports

does anyone know how heavy these cars are

brent eb02

im a stock bottom end.... 346 built 346 is a different story

Pro Stock John

iTrader: (34)

First off BSP, the Hot Rod article was supported heavily by information given to them by me over the course of three months. It was COMPLETELY accurate as of the time of the article deadline.

Dave Whitten, aka RUQuikr (sp?) is indeed the fastest h/c car at 10.50. That was on a stock bottom end.

Most of the cars down around that number are/were 3050-3150 raceweight.

Roger White

PSJ is about right on the pounds anyone that says other wise is full of it.

I got a fist full of time slips.

I even got one with a 10.64 @128 mph in +1000 D/A. This winter alot new best will be set.

JS

iTrader: (4)

There ya go boys.
RUQUIKR = STOCK BOTTOM END FASTEST CAR----->CASE CLOSED

WILWAXU

iTrader: (6)

I've been thinking about starting a list simular to the Stock Internals list. J-Rod and I talked about it a few months back, but never really got off the ground..

If you guys see an interest in a stock cubic inch list, I'll put one together.

Jason99T/A

iTrader: (21)

My car weighed in at 3320 on the 10.59 pass for those interested.

RUQWIKR's car is legit. I have talked to him on quite a few occasions. He has a very well thought out setup and has the car running extremely well.

Jason

SMOKIN01TA

iTrader: (10)

i have a intrest in a 346 ci n/a. list, since i didnt have the patients to get myself on the si. list. but it needs to be forged or stock 346ci motors, cause mine is gunna die in a while spinning 7200