BeaSSt goes 10.47 at HRP tonight
#1
Staging Lane
Thread Starter
Join Date: Nov 2001
Location: Pearland
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Waited a total of 3 hours for two runs tonight. We have been working on many suspension aspects of the car, and tonight it looks like we got a little closer to getting it dialed in.
1st pass
60' 1.431
1/8 6.658
mph 103.62
1/4 10.479
mph 128.35 ( both new bests )
( btw the car still weighed 3408 lbs )
On the second pass the track was getting wet and 3 or 4 cars had oiled the lanes and I was all over the place so I shut it down.
Still working on the suspension and a few other tricks. Still think the car can 60' better. Will try again on Sunday!
Dave & Stephen
www.thebeasst.com
1st pass
60' 1.431
1/8 6.658
mph 103.62
1/4 10.479
mph 128.35 ( both new bests )
( btw the car still weighed 3408 lbs )
On the second pass the track was getting wet and 3 or 4 cars had oiled the lanes and I was all over the place so I shut it down.
Still working on the suspension and a few other tricks. Still think the car can 60' better. Will try again on Sunday!
Dave & Stephen
www.thebeasst.com
#4
10 Second Club
iTrader: (1)
Join Date: Nov 2001
Location: Boggy Creek
Posts: 1,528
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Congrats on a new best with only one pass hehe. That car will go faster with more track time and less weight. I got my car weight down to 3340/3160 w/o me with just the usual stuff,but if you could get your weight around where mine is your looking at some LOW 10s.
#7
FormerVendor
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Congratulations that's seriously hauling *** at that weight !!! <img src="graemlins/burnout.gif" border="0" alt="[Burnout]" />
Trending Topics
#8
LS1 Tech Administrator
iTrader: (14)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Major thumbs up! That's screaming!
__________________
![](https://ls1tech.com/forums/signaturepics/sigpic210_1.gif)
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
![](https://ls1tech.com/forums/signaturepics/sigpic210_1.gif)
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
#9
TECH Enthusiast
Join Date: Nov 2001
Location: Richardson, TX, USA
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Congrats Stephen and Dave!!! Great ET/MPH!!!!
Did you change the Pinion Angle on the Torque Arm since I saw you all last in Late November/Early December?
I expect some low, low 10's/high 9's from this car as soon as this Spring!!!!
<img src="graemlins/fluffy.gif" border="0" alt="[Fluffy]" /> <img src="graemlins/gr_cheers.gif" border="0" alt="[cheers]" /> <img src="graemlins/gr_hail.gif" border="0" alt="[hail]" /> <img src="graemlins/camaro.gif" border="0" alt="[Chevrolet]" />
Did you change the Pinion Angle on the Torque Arm since I saw you all last in Late November/Early December?
I expect some low, low 10's/high 9's from this car as soon as this Spring!!!!
<img src="graemlins/fluffy.gif" border="0" alt="[Fluffy]" /> <img src="graemlins/gr_cheers.gif" border="0" alt="[cheers]" /> <img src="graemlins/gr_hail.gif" border="0" alt="[hail]" /> <img src="graemlins/camaro.gif" border="0" alt="[Chevrolet]" />
#13
Staging Lane
Thread Starter
Join Date: Nov 2001
Location: Pearland
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks all, by the way don't know why sig didn't show up right, as always have to pay homage to the creators.
ARE/FASTECH 432
10.47 @ 128 mph w/ 1.431 60'
Stephen <img src="gr_grin.gif" border="0">
ARE/FASTECH 432
10.47 @ 128 mph w/ 1.431 60'
Stephen <img src="gr_grin.gif" border="0">
#14
LS1Tech Co-Founder
iTrader: (34)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Congrats!
I know you guys have been tweaking that combo to get to that number, it's very impressive at 3400 raceweight!
Do you feel that the PeteZ bars help for an automatic car? I was talking to Judson about those.
I know you guys have been tweaking that combo to get to that number, it's very impressive at 3400 raceweight!
Do you feel that the PeteZ bars help for an automatic car? I was talking to Judson about those.
#16
TECH Apprentice
iTrader: (1)
Join Date: Nov 2001
Location: Pearland Texas
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks alot for the comments guys. We really appreciate it <img src="gr_grin.gif" border="0"> John the bars definately help on the launch as the 60s indicate and as I said in other posts the car leaves straight and goes straight (as long as the track is there) as an arrow, no twist on the launch. I know the car will 1.3x 60' the next time out.
Dave
ARE/FASTECH 432
www.thebeasst.com
Dave
ARE/FASTECH 432
www.thebeasst.com
#17
LS1Tech Co-Founder
iTrader: (38)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
[quote]FASTECH IS NOW PROUDLY INSTALLING AGOSTINO(ARE) AS WELL AS GALLANT(GTP) HEADS AND CAM PACKAGES, AND STROKERS TO 436 CI. Financing available on site, answers within 15 min. (972) 278 1649 or visit us at freeseautosport.com<hr></blockquote>
Hey Sean, our sponsors pay a little bill to post info like this, hint...hint <img src="gr_images/icons/wink.gif" border="0"> When can we expect to see a FASTech banner go up?
Tony <img src="gr_grin.gif" border="0">
Hey Sean, our sponsors pay a little bill to post info like this, hint...hint <img src="gr_images/icons/wink.gif" border="0"> When can we expect to see a FASTech banner go up?
Tony <img src="gr_grin.gif" border="0">
#19
TECH Apprentice
Join Date: Nov 2001
Location: ROWLETT TX USA
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
[quote]Originally posted by Nine Ball:
<strong>
Hey Sean, our sponsors pay a little bill to post info like this, hint...hint <img src="gr_images/icons/wink.gif" border="0"> When can we expect to see a FASTech banner go up?
Tony <img src="gr_grin.gif" border="0"> </strong><hr></blockquote>
Tony, I would love to put up a banner ad. My website is'nt finished yet and I don't want to have a link to an incomplete site. Is it possible to have a banner up that just has my phone # on it for now?
<strong>
Hey Sean, our sponsors pay a little bill to post info like this, hint...hint <img src="gr_images/icons/wink.gif" border="0"> When can we expect to see a FASTech banner go up?
Tony <img src="gr_grin.gif" border="0"> </strong><hr></blockquote>
Tony, I would love to put up a banner ad. My website is'nt finished yet and I don't want to have a link to an incomplete site. Is it possible to have a banner up that just has my phone # on it for now?