Speedinc carpet question
Thread Starter
8 Second Club
iTrader: (34)
Joined: Nov 2001
Posts: 10,852
Likes: 1
From: Knoxville, TN
Speedinc carpet question Is the uncut version of their lightweight carpet cut out for the console? I'd like to ditch the whole center console and was just wondering..
Thread Starter
8 Second Club
iTrader: (34)
Joined: Nov 2001
Posts: 10,852
Likes: 1
From: Knoxville, TN
no biggie sean, I dont want to wait and the console is a good place to store the tire gauge and shoe polish 
The carpet in here is looking pretty sad plus it still has all the padding on it so its time to replace it..
The carpet in here is looking pretty sad plus it still has all the padding on it so its time to replace it.. Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
TwoFast4Lv: Its under the racer's corner in the middle of the page.
Chris ARE 385: I bought the Speed Inc. carpet a couple months back and it was cut for the console, so more than likely yours was too.
Chris ARE 385: I bought the Speed Inc. carpet a couple months back and it was cut for the console, so more than likely yours was too.
Go to Speed Inc.'s main page, click on racer's corner, then in the middle of the page is the carpet. There is no picture. Here is the direct link but I dont think its going to let you view it.
http://www.ls1speed.com/catagory.cfm?catagory=race
http://www.ls1speed.com/catagory.cfm?catagory=race
I ruin the end of films...
iTrader: (2)
Joined: Nov 2002
Posts: 1,545
Likes: 0
From: Taking back some video tapes
I'm using some cheapo stuff from good ole Wal-Mart. It's lightweight (as in 5# total) and cheap ($35 to cover the interior back to the rear hump). I'll put it in when the cage is done. I used a roll in the Mustang we used to have @ the shop and it looks real good when you take the time to lay it properly.
I'm not running a center console either. My Pro Stick is angled towards the driver seat and there was no way to make it look good w/ the console in place. The old pics from the initial mockup are here:
http://www.quarter-mile.net/images/TA/interior/
I thought I had some newer interior pics, but I think they're still on the camera...at the shop.
I'm not running a center console either. My Pro Stick is angled towards the driver seat and there was no way to make it look good w/ the console in place. The old pics from the initial mockup are here:
http://www.quarter-mile.net/images/TA/interior/
I thought I had some newer interior pics, but I think they're still on the camera...at the shop.
Last edited by mongse; Oct 31, 2004 at 09:02 PM.
Thread Starter
8 Second Club
iTrader: (34)
Joined: Nov 2001
Posts: 10,852
Likes: 1
From: Knoxville, TN
Got my carpet yesterday and it wasnt cut for the console. I didnt like the look without the console though so I put it back in, it was 20lbs less then my stock carpet with all the padding still on ot.