camarokid94

iTrader: (2)

i know this is old but where do you find PA racing stuff ?? are they a sponcer??? i didnt see them over >>>>>

01RedZ28

iTrader: (6)

Contact Mike at Straightline http://www.1320hp.com/
That's were i got my PA k-member from.

a98ws6

iTrader: (48)

Got mine from Thunder Racing. PA

chvypwr31

iTrader: (4)

im goin with the whole bmr front drag race kit minus k member im gonne be buildin my own k member

camarokid94

iTrader: (2)

thanks

BMR Tech2

iTrader: (5)

Thanks for your support. If you have any questions please give us a call. Our tech/sales dept is open till 6PM EST. Mon-Fri.

Racecraft Inc.

iTrader: (1)

Deadly,

Please call me at the shop 507-243-4104 I would like to know what specific problems you had with your K-member, because this is the first I have heard of a problem with our product. I would expect a phone call from a customer that bought a part that didn't fit properly. I will wait for your call.

Thanks,

Mark Wilkinson
http://www.racecraft.com

thechef

iTrader: (13)

MADMAN or BMR is the only way you want to go

JL ws-6

iTrader: (50)

Chef I don't think that Madman actually makes a K member, he uses the Burkhart one on most of his builds if I remember correctly.


A question for the suspsnsion manufacturer's that you probably can answer, could a k member be made that has a removable center? meaning the crossbar, could that be made so that it bolts in, so that you could easily remove the oil pan with the motor in the car?

This of course would be a race only piece, requiring a motor plate like the Burkhart piece and steet use would be a no no I understand that.

Mr.MartyStone

iTrader: (12)

You can get the racecraft piece with a lowered center bar for oil pan access. I would give them a call.

ty_ty13

iTrader: (42)

i'm very happy with my burkhart kmember and everything else they make... top notch stuff.

JL ws-6

iTrader: (50)

Burkhart is probably how I am gonna go unless I find a really KILLER deal on something before this offseason.

ty_ty13

iTrader: (42)

burkhart and racecraft spindles have been the most impressive pieces i've gotten... fit awesome everything lined up PERFECT!

you cant say that about most race car stuff lol!

UMI Performance

iTrader: (77)

Please keep us in mind as well. We offer a never nice set-up intended for drag racing and street driving. Our K-members can also be built with no motor mounts and less powder coat if desired as well.

We also offer some nice front end drag kits seen below. If you have any questions please let me know. Thank you!
Ryan

http://www.umiperformance.com/produc...ategory_id=137