Brake bias w/strange master cyl.
#21
I agree with Steve I have one of their setups in my car and it is great. You even think about slamming in the brakes and you better hold on because you will stop on a dime and that is with stock brakes. They have their sh*t figured out well worth it
#22
Race your car!
iTrader: (50)
My problem is not doing a burnout...it the front tire are locked at the line and when I get on the converter ( I run footbrake class) it just slides the front tires through the lights. I need more rear brake.
The pedal etc. is fine, I have run this for almost 8 years without the brace and never had an issue. There is not air in it, I bench bled it and used a power bleeder. I think the lines just need to be swapped.
You can't really tell here b/c the converter was too loose.....I was in 3rd gear@7000 before the 1/8.
The week before I was pushing through the lights and going through the top end @ 6700 125mph with a 1.7 60'
I have converter issues but the brakes did not help......The converter was too tight and not having enough brake didn't help
View Video on FQuick
The pedal etc. is fine, I have run this for almost 8 years without the brace and never had an issue. There is not air in it, I bench bled it and used a power bleeder. I think the lines just need to be swapped.
You can't really tell here b/c the converter was too loose.....I was in 3rd gear@7000 before the 1/8.
The week before I was pushing through the lights and going through the top end @ 6700 125mph with a 1.7 60'
I have converter issues but the brakes did not help......The converter was too tight and not having enough brake didn't help
View Video on FQuick
You can try swapping the lines, but I don't knwo howmuch a difference it will make.
#24
9 Second Club
Thread Starter
iTrader: (3)
Join Date: Nov 2006
Location: Goochland, Va.
Posts: 644
Likes: 0
Received 0 Likes
on
0 Posts
I swapped em, it didn't make much of a difference but I also got the conveter restalled and its alot better now. pick up 5 mph in the 1.8 and dropped .15 on the 60'
Props to ATI
Props to ATI