Greg Weld Bigs and Littles are ON!!
Greg Weld Bigs and Littles are ON!! Man I LOVE these rims. They are so freakin hot it's not even funny. I was so worried I wouldn't like them but DAMN!! They are Greg Weld 15x8 5.5bs w/26x10x15 Mickey Thompson S/R radials and the fronts are 15x3.5 1.75bs w/26x6x15 Mickey Thompson S/R Radials. It is a much smoother ride now and still handles pretty good. I will probably have to do a little fender rolling but otherwise the do fit well. I DID however have to do some serious grinding on the REAR calipers to the the wheels the clear. It was no big deal though.
I would have to minitub this to make bigger fit right. I don't have any front pics yet. I will over the weekend though.
Launching!
Joined: Oct 2006
Posts: 238
Likes: 0
From: GB, MD
I like them. From the side they look like they could be 100% street wheels/tires. (I know they ARE streets, but you know what I mean, not lightweight racing wheels.) It's a nice subtle but sharp look if that makes any sense.
I just like how it looks compared to draglites and most of the other "race" wheels.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
This is going to be my "street" setup. I will be getting another pair of rear rims as soon as I gather some more money and going with some ET streets probably. If I can get a 28" tire to stuff in there I might do that too.
A street setup should look good...which on a GTO would require at least 17" wheels. You could get away with that at the track because seldom does a drag setup look anywhere near as good as a street setup, but I'm going to have to agree with the majority and say it just doesn't look right. Stickers have to go to as well...pretty ricey.
Teching In
Joined: Mar 2007
Posts: 14
Likes: 0
From: New Jersey
i think they look good on the gto's
just like in this thread
https://ls1tech.com/forums/drag-racing-results/970762-wow-just-wow.html
just like in this thread
https://ls1tech.com/forums/drag-racing-results/970762-wow-just-wow.html
