New results, cam only.
03-09-2009, 04:13 PM
#1
Launching!
Thread Starter
iTrader: (5)
Join Date: Nov 2008
Location: Houston
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
New results, cam only. I told you guys I would come back and post the results after the cam, here it is.
Stock TB, LS6 IM, Comp Cam, powerbond underdrive pulley, pacesetter headers, ORY, dumped over back axle.
For some reason the scanner didn't pick up the red well so I dotted the line so you could easily follow it.
Here is the old thread:
https://ls1tech.com/forums/dynamomet...oesnt-say.html
Stock TB, LS6 IM, Comp Cam, powerbond underdrive pulley, pacesetter headers, ORY, dumped over back axle.
For some reason the scanner didn't pick up the red well so I dotted the line so you could easily follow it.
Here is the old thread:
https://ls1tech.com/forums/dynamomet...oesnt-say.html
Trending Topics
03-10-2009, 12:02 PM
#8
Launching!
Thread Starter
iTrader: (5)
Join Date: Nov 2008
Location: Houston
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
Here's the overlay before/after. I didn't really lose anything down low, just made power up high. Everything after 3250rpm is a plus so I'm happy.
BTW, I don't know if their printer was low on ink but I had to go over the graphs with a pen so that's why it looks funny.
BTW, I don't know if their printer was low on ink but I had to go over the graphs with a pen so that's why it looks funny.
