Got the camaro back today!! Disappointing numbers???
#1
TECH Enthusiast
Thread Starter
iTrader: (12)
Join Date: Nov 2008
Location: Long Island, NY
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
Got the camaro back today!! Disappointing numbers???
I got my camaro back today and it sounds awesome but the numbers were lower than expected and I even did a pole on here a while back and everybody agreed with me that it would be around 375rwhp.
Mods and car>2002 z28 a4 w/ 49k, TR224 cam, mac mid length headers and y-pipe with high flow carsound bullet cats, lid, kandn, fram, tbb, hooker aerochamber catback, msd wires, smooth bellow, underdrive pulley, and a vette doctors dyno tune.
Could it be that they used mineral oil and the engine isn't broken in yet.
Wanted 375rwhp/370rwtq, actual numbers were 348.5@5400 and 359.2@4300(wasn't a mustang dyno)
flattens out after 5300 to 6000 (stays right between 343rwhp and 348.5rwhp)
Mods and car>2002 z28 a4 w/ 49k, TR224 cam, mac mid length headers and y-pipe with high flow carsound bullet cats, lid, kandn, fram, tbb, hooker aerochamber catback, msd wires, smooth bellow, underdrive pulley, and a vette doctors dyno tune.
Could it be that they used mineral oil and the engine isn't broken in yet.
Wanted 375rwhp/370rwtq, actual numbers were 348.5@5400 and 359.2@4300(wasn't a mustang dyno)
flattens out after 5300 to 6000 (stays right between 343rwhp and 348.5rwhp)
#4
TECH Enthusiast
Thread Starter
iTrader: (12)
Join Date: Nov 2008
Location: Long Island, NY
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
It was tuned as far as I know, the shifts are different, ect.
It hits 348.5rwhp at 5300 and slowly goes down to 343 at 6000. What hp are cars making 375rwhp making at 5300rpm.
It hits 348.5rwhp at 5300 and slowly goes down to 343 at 6000. What hp are cars making 375rwhp making at 5300rpm.
Last edited by camz28arro; 04-11-2009 at 04:18 PM.
Trending Topics
#10
TECH Fanatic
iTrader: (65)
Join Date: Jun 2006
Location: OKC
Posts: 1,188
Likes: 0
Received 0 Likes
on
0 Posts
Doesn't surprise me really, i used to have a z28 with almost the same setup except i had LT's and ORY. I only made 340 something on a dynojet through an a4. It ran great at the track though so i didn't really care.
#13
TECH Enthusiast
Thread Starter
iTrader: (12)
Join Date: Nov 2008
Location: Long Island, NY
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
Yea, I brought it somewhere and they did the work and tune, it has the parts on it and the numbers are right where they should be until 5300rpm
I needed the car back in a week and if i did the work it would of been closer to a month so I brought it there.
I have the dyno sheet before the cam/headers/tune/pulley and will post a link soon.
http://upload.streetfire.net/photo/P...pg_1662761.htm
Kinda hard to see but it made 340rwhp at 5000rpm which seems on par for a 375rwhp car but whats holding me back.
I needed the car back in a week and if i did the work it would of been closer to a month so I brought it there.
I have the dyno sheet before the cam/headers/tune/pulley and will post a link soon.
http://upload.streetfire.net/photo/P...pg_1662761.htm
Kinda hard to see but it made 340rwhp at 5000rpm which seems on par for a 375rwhp car but whats holding me back.
Last edited by camz28arro; 04-10-2009 at 11:20 PM.
#17
TECH Enthusiast
Thread Starter
iTrader: (12)
Join Date: Nov 2008
Location: Long Island, NY
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
I'd like to be more certain it's one of those problems before I start blaiming anybody. Could you give me some symptoms I should look out for. Car does shake at 6-700 idle. Stalled once on me too. (automatic)
I only gained 32rwhp from a underdrive pulley, tune, tr224, and mac mids!!!
Thanks for the help guys, I'm really disappointed with the top end numbers.
Last edited by camz28arro; 04-11-2009 at 02:24 AM.
#19
TECH Enthusiast
Thread Starter
iTrader: (12)
Join Date: Nov 2008
Location: Long Island, NY
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
What rwhp did you make at 5000rpm, there's no reason my hp leveled out at 5000, it should have pulled to 6000. I found another dyno sheet where someone had the same hp at 5000 (340rwhp) and a little less torque and they made 365rwhp. (same mods, no pulley)
#20
Launching!
iTrader: (5)
Join Date: Oct 2008
Location: eastern shore, VA
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
i have the same cam and i peaked at 5600. which i also thought was odd. what kind of dyno were you tuned on, mine was a dyno dynamics and i have heard that they are nick named the heart breaker dyno. but that doesnt explain why we both peaked so early.