fast347

I just bought a 98 z28 a4 it has a 348 forged bottom end stage 2 heads ,mac headers,off road y-pipe,pulley,i don't know the cam specs but it is small ,3:73 gears,vigilante converter 3200 stall,trans-go shift kit,150 shot,ls6 intake,ported throttle body,all BMR suspension,has wide band tuning by MTI car made 390hp and 440trq on motor and 498hp and 546 trq on 150 shot.weight is around 3400lbs.

Hennytime

iTrader: (33)

you will run 10's with m/t streets

setxws6

Have a buddy that had a similar rwhp on motor, cam only, and with slicks and a 1.5X 60" ran low 11's.

Matt D

iTrader: (49)

I had 320hp and a raceweight of 3050lbs, and ran 11.49@116mph. Stock Internals. So you should have no problem being in the 11s.

BLK02WS6

iTrader: (2)

When I had an A4, I was 3550# and had 385rwhp (unlocked) went 11.4's

fast347

i took my car out to the track and it ran consistent 11.80 @114 mph 7.52 @ 92mph in 1/8. I was cutting 1.66 on the 60' ft did not get to spray bottle was empty car weights 3370witj no driver and 3555 with driver what can i do to get into low 11's on motor

Jimmy P

iTrader: (177)

I would say a larger cam, and a 4000 stall or so would be nice.

jlee41

easy low 11's and some good 10's are possible if you can get good 60's

vodas00ss

iTrader: (14)

i think it all just depends on your tires and suspension, and of course the driver.

2c5s

iTrader: (11)

I ran 11.80's all day long in a 99 c5 a4 coupe with around 390 rwhp.

Photochop

iTrader: (74)

My car's gone 11.89@114 w/ a 1.76 60 ft, 3620# (with 200 of me in it)

Car put down 348 rwhp thru an unlocked TCI 4400 convertor, stock 10 bolt with 3.73s and heavy 17x11 wheels

You should hit mid 11s easily and 10s on the squeezer for sure with a decent 60'

97blkz

iTrader: (1)

With a really good 60 high 10's, location counts too and Houston is good.

Ragtop 99

iTrader: (7)

I did it with 380 rwhp (locked) a full weight vert