Vengeance Racing/TrickFlow Do it again!!!! 488RWHP/430RWTQ 346 STREET CAR!!!!
#1
Vengeance Racing/TrickFlow Do it again!!!! 488RWHP/430RWTQ 346 STREET CAR!!!!
Im pretty stoked about this one guys!!! These TrickFlows are doing the job!!! Setup consists of the following
2002 LS1 F body-M6-10 bolt 4:11s-315/35/17 Drag Radials
TrickFlow Heads-59cc chambers-massaged by Vengeance Racing
Vengeance Racing Custom Camshaft-VRX1
SLP Lid
SLP 85mm Maf
Nick Williams 90mm TB
FAST 90mm Intake Ported by Vengeance
Dynatech 1 3/4 Longtubes-ORY
GMMG Chambered exhaust
Vengeance Ported Oil pump
Double Roller timing chain
ASP UnderDrive pulley
Meziere STREET pump
Vengeance Racing Custom Programming
Car was tuned to 28.5* total timing and 12.9 A/F... This is a DAILY DRIVER
No notching of the pistons, no dyno tricks, just straight out awesome power!!!!!
There should be a few left in it with some more tuning.We are still on the stock 02 injectors and fuel pump... Hoping for 500rwhp in a week or so when we get back on the dyno with the upgraded parts.
Customer also has a Textralia clutch with the steel flywheel, so thats not helping things
Below is a graph overlay Stock/Bolt ons Vs Vengeance/TrickFlow Results
Anyone interested in this package is welcome to shoot me a PM or email. We will be putting together a Sale in the Sponsor Sale forums in the next few days as well.
2002 LS1 F body-M6-10 bolt 4:11s-315/35/17 Drag Radials
TrickFlow Heads-59cc chambers-massaged by Vengeance Racing
Vengeance Racing Custom Camshaft-VRX1
SLP Lid
SLP 85mm Maf
Nick Williams 90mm TB
FAST 90mm Intake Ported by Vengeance
Dynatech 1 3/4 Longtubes-ORY
GMMG Chambered exhaust
Vengeance Ported Oil pump
Double Roller timing chain
ASP UnderDrive pulley
Meziere STREET pump
Vengeance Racing Custom Programming
Car was tuned to 28.5* total timing and 12.9 A/F... This is a DAILY DRIVER
No notching of the pistons, no dyno tricks, just straight out awesome power!!!!!
There should be a few left in it with some more tuning.We are still on the stock 02 injectors and fuel pump... Hoping for 500rwhp in a week or so when we get back on the dyno with the upgraded parts.
Customer also has a Textralia clutch with the steel flywheel, so thats not helping things
Below is a graph overlay Stock/Bolt ons Vs Vengeance/TrickFlow Results
Anyone interested in this package is welcome to shoot me a PM or email. We will be putting together a Sale in the Sponsor Sale forums in the next few days as well.
Last edited by Ron@Vengeance; 09-08-2006 at 12:14 PM.
#6
FormerVendor
iTrader: (13)
WOW!
400+ lb ft of torque from 3700-6300
420 lb ft of torque from 4500-6000
Definitely not a "peaky" power curve like some of the other high HP head/cam cars.
488 RWHP SAE, that has to be a non flycut piston record!!
Great job guys!! Maybe you should box up and ship one of those cams for my car
BTW, how does that compare to some of the best RWHP you have seen from some of the other heads on the market?
400+ lb ft of torque from 3700-6300
420 lb ft of torque from 4500-6000
Definitely not a "peaky" power curve like some of the other high HP head/cam cars.
488 RWHP SAE, that has to be a non flycut piston record!!
Great job guys!! Maybe you should box up and ship one of those cams for my car
BTW, how does that compare to some of the best RWHP you have seen from some of the other heads on the market?
#7
10 Second Club
iTrader: (1)
real nice #'s. add a 12bolt and loose 15 hp go to a stang dyno and loose another 20hp like i did. i got 463hp 414tq 12bolt 4.11 on a stang dyno no tricks on a street car w/steel flywheel dynoed in 90deg heat too. your set up is nice,powerful too.
Last edited by mike c.; 09-11-2006 at 02:31 PM.
Trending Topics
#8
..... Or I could dyno when its 68* outside and pick up 20rwhp and make over 500rwhp... or I could swap injectors and the fuel pump and make over 500rwhp in the same heat This package isnt done guys.... I just wanted to share the preliminary results!!!
The camshaft is a VRX1 Specs will be released soon......
Brian,
This combo is one of the most powerful we have done to date.... We havent compared anything to the other aftermarket heads, because we have been having such great luck with the TFS heads....
The camshaft is a VRX1 Specs will be released soon......
Brian,
This combo is one of the most powerful we have done to date.... We havent compared anything to the other aftermarket heads, because we have been having such great luck with the TFS heads....
Originally Posted by mike c.
real nice #'s. add a 12bolt and loose 15 hp go to a stang dyno and loose another 20hp like i did. i got 463hp 414tq 12bolt 4.11 on a stang dyno no tricks on a street car w/steel flywheel too. your set up is nice,powerful too.
#10
12 Second Club
Join Date: Jan 2005
Location: Atlanta, Ga
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
I can't waite to get back to Atlanta and pick up my car. Needs to be flogged at the track. Starting to save for the 12-bolt now. Track times to come w/sissy launches on 10-bolt. Thank you Mike and Ron @ Vengeance!! Money well spent!!!
#11
TECH Veteran
iTrader: (33)
Join Date: Nov 2001
Location: Port Richey
Posts: 4,266
Likes: 0
Received 0 Likes
on
0 Posts
that tq is just phenominal. I think that tells the real story of how effective the heads are. It appears these heads are capable of much more with the right setup (cam/intake) in an all out race application.
but this street setup is incredible.
but this street setup is incredible.
#12
LS1TECH Sponsor
Originally Posted by SlickVert
Very Impressive set-up!
Can you share the cam spec?
Can you share the cam spec?
The great thing about this car is how well it drives and starts hot with the A/C on perfect everytime.
I think we can probably go for around 495 with a few other changes. I know with a 12 bolt we will lose of few but I still think the car will be in the 480's with a 12bolt.
I am looking for a good LS2 customer to shoot for around 500PLUS RWHP with a setup similar to this one with a few minor changes. With the extra cubes of the LS2 I honestly feel we can make 500 plus on a stock bottom end. If I do it I will post of the graph but I am very happy with this setup. (FOR NOW )
Well that my post for the Summer Season. See you guys
#13
TECH Fanatic
iTrader: (3)
Join Date: Jun 2004
Location: Dayton, OH
Posts: 1,844
Likes: 0
Received 0 Likes
on
0 Posts
Wow, that is some major power. My goal is to have a set-up like that but I want to be sure I'm picking the right bolt-ons for now.
I'm thinking about going GMMG as well, do you think you would have made a lot more power with a true dual set-up, or only a couple more HP?
I'm thinking about going GMMG as well, do you think you would have made a lot more power with a true dual set-up, or only a couple more HP?
#14
LS1 Tech Administrator
iTrader: (14)
Outstanding numbers!
It's interesting that you posted the before dyno graphs as 340/360 rwhp/rwtq because Weekend Racer quoted his pre-heads/cam numbers as 360/382 from this:
2002 Camaro SS w/full bolt-ons 11,000 miles
List:
1 3/4 dynatech supermaXX LT headers no cats
90/90 Tb/intake
85 mm MAF sensor
ASP pulley
Lid w/K&N filter
Cold air kit
tubular subframes
short throw shifter
Stock 10-bolt w/4.10 gears
Dyno results: 360 rwhp 382 ft.lbs.torque following dyno tune
1/4 mile: 12.78 @ 111 mph at Commerce in Atlanta GA/ hot as hell outside crappy track prep
60 ft time: 1.92 w/ Nitto drag radials
Heads bought/ cam will be 232/234
A 128 rwhp/48 rwtq gain sounds like the real before/after numbers and not 148 rwhp/70 rwtq gain. Not trying to take anything away from the numbers, like I said, they're outstanding! I'm just trying to get a handle on how much power the TFS heads and mystery cam added. I'm always looking for more power myself.
It's interesting that you posted the before dyno graphs as 340/360 rwhp/rwtq because Weekend Racer quoted his pre-heads/cam numbers as 360/382 from this:
2002 Camaro SS w/full bolt-ons 11,000 miles
List:
1 3/4 dynatech supermaXX LT headers no cats
90/90 Tb/intake
85 mm MAF sensor
ASP pulley
Lid w/K&N filter
Cold air kit
tubular subframes
short throw shifter
Stock 10-bolt w/4.10 gears
Dyno results: 360 rwhp 382 ft.lbs.torque following dyno tune
1/4 mile: 12.78 @ 111 mph at Commerce in Atlanta GA/ hot as hell outside crappy track prep
60 ft time: 1.92 w/ Nitto drag radials
Heads bought/ cam will be 232/234
A 128 rwhp/48 rwtq gain sounds like the real before/after numbers and not 148 rwhp/70 rwtq gain. Not trying to take anything away from the numbers, like I said, they're outstanding! I'm just trying to get a handle on how much power the TFS heads and mystery cam added. I'm always looking for more power myself.
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
#16
On The Tree
Join Date: Jan 2005
Location: Boulder, CO
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ron@Vengeance
..... Or I could dyno when its 68* outside and pick up 20rwhp and make over 500rwhp
#18
TECH Addict
Join Date: Jul 2002
Location: Somewhere I Belong
Posts: 2,906
Likes: 0
Received 0 Likes
on
0 Posts
Very impressive #'s thru 4.10's
Congrats man & keep up posted with ETs
peace
Originally Posted by Weekend Racer
I can't waite to get back to Atlanta and pick up my car. Needs to be flogged at the track. Starting to save for the 12-bolt now. Track times to come w/sissy launches on 10-bolt. Thank you Mike and Ron @ Vengeance!! Money well spent!!!
peace