Trickflow 215 Heads and Vette Doctors custom cam results.
#1
TECH Resident
Thread Starter
Join Date: Dec 2003
Location: Long Island, NY
Posts: 797
Likes: 0
Received 0 Likes
on
0 Posts
Trickflow 215 Heads and Vette Doctors custom cam results.
My car is done and I just arrived back in the carribean (was on break for holidays) to start this semester of MD school. Only got to drive her 1 day Ill be back in a month for a short break and this season and summer should be awesome
BUT DAMM what a setup! Car is a monster.
2003 ZO6
215 Trickflow Heads w/ assembled dual springs etc.
Vette Doctor "to be announced" Custom Cam
Harland Sharp Rockers
TPIS Longtubes w/ Dr. Gas X pipe
Halltech intake
GHL Catback exhaust.
Stock LS6 Intake manifold, Stock LS6 TB, Stock pullies and belts, everything else STOCK that I havent said. Even the clutch, didnt make it in time (damm spec!). I wonder if that made any difference in power?
Rainy day with horrible humidity in NY yesterday.
Eitherway I was very pleased with the results.
498rwhp 427rwtq
There was also a 491 in there, also a 479(first pull with very little tuning if any)
Id like to thank the Vette Doctors for specing out such a great cam for my setup and building/tuning such a beast. Thank you Carmen, Dennis, Joey and Pete.
Id like to thank Brian Tooley who I heard had ALOT to do with designing these heads!
Also Id like to thank ECS for having the trickflow 215 heads in stock and letting me pick them up from the shop while they are closed, Saturday right before the holidays. Very much appreciated. Thanks Doug
Id also like to thank summit racing for raping me with prices with overnight shipping but getting the parts IN TIME which was key (rockers, and trickflow pushrods).
Car drives great, it was damp out yesterday in NY so I really couldnt get on it but got a idea of the manners and its definetly can be DD which I intend to when I am back.
Mid range around 3500-4k is a nice hit but uptop 5k+ its absolutely retarded. I got nowhere close to redline because of the weather which totally blew! . My friend took a few clips of idle and I should have them soon. Car is pretty damm loud but sounds very good and I absolutely love it.
Nitrous #s and track times to come this spring.
Zee
BUT DAMM what a setup! Car is a monster.
2003 ZO6
215 Trickflow Heads w/ assembled dual springs etc.
Vette Doctor "to be announced" Custom Cam
Harland Sharp Rockers
TPIS Longtubes w/ Dr. Gas X pipe
Halltech intake
GHL Catback exhaust.
Stock LS6 Intake manifold, Stock LS6 TB, Stock pullies and belts, everything else STOCK that I havent said. Even the clutch, didnt make it in time (damm spec!). I wonder if that made any difference in power?
Rainy day with horrible humidity in NY yesterday.
Eitherway I was very pleased with the results.
498rwhp 427rwtq
There was also a 491 in there, also a 479(first pull with very little tuning if any)
Id like to thank the Vette Doctors for specing out such a great cam for my setup and building/tuning such a beast. Thank you Carmen, Dennis, Joey and Pete.
Id like to thank Brian Tooley who I heard had ALOT to do with designing these heads!
Also Id like to thank ECS for having the trickflow 215 heads in stock and letting me pick them up from the shop while they are closed, Saturday right before the holidays. Very much appreciated. Thanks Doug
Id also like to thank summit racing for raping me with prices with overnight shipping but getting the parts IN TIME which was key (rockers, and trickflow pushrods).
Car drives great, it was damp out yesterday in NY so I really couldnt get on it but got a idea of the manners and its definetly can be DD which I intend to when I am back.
Mid range around 3500-4k is a nice hit but uptop 5k+ its absolutely retarded. I got nowhere close to redline because of the weather which totally blew! . My friend took a few clips of idle and I should have them soon. Car is pretty damm loud but sounds very good and I absolutely love it.
Nitrous #s and track times to come this spring.
Zee
#2
LS1 Tech Administrator
iTrader: (14)
Dang, nearly 500 rwhp with an LS6 intake? That's sweet power for sure! Congrats.
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
#7
TECH Senior Member
iTrader: (3)
Join Date: Apr 2006
Location: Western Burbs of Detroit
Posts: 6,524
Likes: 0
Received 1 Like
on
1 Post
That cam must be HUGE !!!! What did they do stuff .620/.620 250/250 cam in there??? That kind of power is making me guess huge cam lift on the intake and exhaust side, and a ton of duration. Over size valves??? CONGRATS on all that power.
Please post specs on that cam ASAP !!!!!!!!!!!!!! Dying to know...............Thanks.
Vette Dr's seem to get some amazing results!!!!!!!!!!!!! Lots of know how in that shop.
Please post specs on that cam ASAP !!!!!!!!!!!!!! Dying to know...............Thanks.
Vette Dr's seem to get some amazing results!!!!!!!!!!!!! Lots of know how in that shop.
Last edited by allngn_c5; 01-09-2007 at 06:16 PM.
Trending Topics
#8
TECH Junkie
iTrader: (36)
Awsome to hear of the results. Carmen called me right when he was done and was very happy.
The cam specs aren't as big as you would think. It isn't as big as some of the other cams that people are using on a regular basis. I'll say it is smaller then a T-Rex and very drivable.
The cam specs aren't as big as you would think. It isn't as big as some of the other cams that people are using on a regular basis. I'll say it is smaller then a T-Rex and very drivable.
#15
TECH Resident
Thread Starter
Join Date: Dec 2003
Location: Long Island, NY
Posts: 797
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys!
Yeah stock ls6 intake.
I am not too sure if the heads are milled, Id like to know myself. I really dont think much if any?
Out of respect to Vette Doctors I cannot release cam specs but it is NOT bigger than any other stage 3 cam. All comparable to ms3, g5x3 type around 600 lift.
Yeah stock ls6 intake.
I am not too sure if the heads are milled, Id like to know myself. I really dont think much if any?
Out of respect to Vette Doctors I cannot release cam specs but it is NOT bigger than any other stage 3 cam. All comparable to ms3, g5x3 type around 600 lift.
#16
On The Tree
iTrader: (4)
Join Date: Dec 2005
Location: LI, NY
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CraZee ZO6
Thanks guys!
Yeah stock ls6 intake.
I am not too sure if the heads are milled, Id like to know myself. I really dont think much if any?
Out of respect to Vette Doctors I cannot release cam specs but it is NOT bigger than any other stage 3 cam. All comparable to ms3, g5x3 type around 600 lift.
Yeah stock ls6 intake.
I am not too sure if the heads are milled, Id like to know myself. I really dont think much if any?
Out of respect to Vette Doctors I cannot release cam specs but it is NOT bigger than any other stage 3 cam. All comparable to ms3, g5x3 type around 600 lift.
#18
Moderator
iTrader: (4)
Join Date: Nov 2001
Location: Montgomery, AL
Posts: 2,074
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bad2000z
Wow!!...I wonder what that combo would do with an A4 f-body...?
Great numbers CraZee ZO6!
John
Last edited by JNorris; 01-08-2007 at 10:56 PM.
#20
TECH Resident
Thread Starter
Join Date: Dec 2003
Location: Long Island, NY
Posts: 797
Likes: 0
Received 0 Likes
on
0 Posts
sorry guys I dont have a scanner. Ill ask Carmen at Vette Docs to post it up for me.
Gears: Stock 3.42's car will see juice so I think I should stick with the stock gear.
Gears: Stock 3.42's car will see juice so I think I should stick with the stock gear.