just ordered my h/c package from tsp!!! got the prc 5.3 stage 2.5 heads with their magic stick 3 cam. with the other mods in my sig...what do you guys predict the numbers to be. anyone running this setup?

 

cam specs are Magic Stick V.3 237/242 .603/.609"

 

A4 i would say maybe 380-390hp if your M6 then i would say maybe over 400..

 

not cam only BJ, he ordered H/C. I would say damn close to 430 with a good tune and boltons. ive seen some damn good numbers from that combo.

 

377rwhp/351rwtq SAE Locked with cam only "MS3" so ya should be at 400-410rwhp with good tune buddy

peace

 

that's the kind of numbers i'm looking for! i can't wait till it comes in the mail.

 

O ok ya with H/C i will have to say you will be definitely over 420hp ive seen some get to the 450's with H/C on A4's.

 

my numbers are in my sig
thats head/cam w/MS3 and a unlocked 3500 stall.

 

mine made 436hp ms3 and 225"s in my 02 zo6 tq was low 390

 

380/340 unlocked, mods in sig

 

i guess my friend is just lucky today gettin tuned full bolt ones he made 440 and 400 tourqe.. jeremy tuned it.. oh ya its cam only

 

MS3's are so overrated. . . good peak horsepower with a inline 4-cylinder's torque!!, . . im guessin with your setup, . . 410RWHP, and 370 torque

 

did u not just read what i wrote ????

 

Your obviously not a big MS3 fan!!

 

I did 372/367 unlocked with my 228/232 cam only A4 unlocked. Id hope to be 385-395 with the MS3. Id hope.

 

I personally have that exact same set up on my car, MS3 with PRC Stg 2.5 5.3l Heads. Car made 460rwhp 400rwtq still with ls6 intake and stock tb. Awesome set up in my opinion, with the small runner you get a lot of low end power out of it. Feel free to PM me or call with any questions!

 

Id say 450/380-390 or so!

i made 411/351 with a locked converter without underdrive pulley and still has stock unported TB and ls6 intake, cam only!

 

my numbers are in my sig, i have ported ls6 heads

 

Im an A4 and have those heads wuth a TR224/112 cam and put down 410rwhp 400ft and was still climbing till my driveshaft whent out so it still has more in her.I think youll get atleast 440rwhp

 

i did 430 rwhp thru 4000 unlocked stall with a fast 90, pulley, prc heads and ms3. v3 cam big heavy wheels and a steel driveshaft n 3.73 gears

for that dyno that was good numbers .....


overall im very happy u will be too