dyno results cam 231/237
#1
TECH Fanatic
Thread Starter
iTrader: (7)
Join Date: Dec 2003
Location: Las Vegas, from Crystal Lake IL
Posts: 1,305
Likes: 0
Received 0 Likes
on
0 Posts
dyno results cam 231/237
car 2001 camaro z28 m6 106,xxx miles with all bolt-on mods
new dyno graph with this cam.
cam specs
Speed inc SI5
231/237 589/595 lsa 112+4
With Air Filter (fram paper):
418rwhp
392rwtq
I'm pretty happy with these numbers!
I like that at 3200 rpms I'm above 350rwtq, and the HP line is smooth all the way through. NOT peaky at all!
Thanks to Larry at Speed inc. for spending time with me on picking the right parts and getting my car in for a tune during a busy season!
new dyno graph with this cam.
cam specs
Speed inc SI5
231/237 589/595 lsa 112+4
With Air Filter (fram paper):
418rwhp
392rwtq
I'm pretty happy with these numbers!
I like that at 3200 rpms I'm above 350rwtq, and the HP line is smooth all the way through. NOT peaky at all!
Thanks to Larry at Speed inc. for spending time with me on picking the right parts and getting my car in for a tune during a busy season!
Trending Topics
#8
TECH Fanatic
Thread Starter
iTrader: (7)
Join Date: Dec 2003
Location: Las Vegas, from Crystal Lake IL
Posts: 1,305
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by xfactor_pitbulls
Really, that curve and power is uncharacteristic for that cam. Great numbers and you must have it setup right!
what makes you say that?
what is the characteristics typical of this cam!!!
#10
TECH Fanatic
Thread Starter
iTrader: (7)
Join Date: Dec 2003
Location: Las Vegas, from Crystal Lake IL
Posts: 1,305
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MyTA99
Is this a cam only?
hooker lts ory, exhaust cutout
lid, ported TB, undrive pulley etc....
#11
TECH Fanatic
iTrader: (1)
Join Date: May 2004
Location: Mesa, Arizona
Posts: 1,691
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ibanez7
what makes you say that?
what is the characteristics typical of this cam!!!
what is the characteristics typical of this cam!!!
#12
TECH Senior Member
iTrader: (23)
Join Date: Aug 2005
Location: Watertown, NY
Posts: 8,797
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by xfactor_pitbulls
Really, that curve and power is uncharacteristic for that cam. Great numbers and you must have it setup right!
#15
TECH Fanatic
Thread Starter
iTrader: (7)
Join Date: Dec 2003
Location: Las Vegas, from Crystal Lake IL
Posts: 1,305
Likes: 0
Received 0 Likes
on
0 Posts
results may change since my car is now throwing 6 ses codes after the tune. The culprit might be the SLP MAF i have. might be time to go to stock!!
codes
multiple cylinder misfire
and 5 others.. dont remember what they are
hopefully its just the maf and maybe be able to squeeze out a few more horses!
codes
multiple cylinder misfire
and 5 others.. dont remember what they are
hopefully its just the maf and maybe be able to squeeze out a few more horses!
#16
TECH Addict
iTrader: (16)
Join Date: Jul 2004
Location: Nevada, TX
Posts: 2,218
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lilbuddy1587
I think what Xfactor is thinking of is the TSP 231/237 that uses the lazy lunati lobes. Theres nothing wrong with your numbers, they look good man.
#18
TECH Fanatic
Thread Starter
iTrader: (7)
Join Date: Dec 2003
Location: Las Vegas, from Crystal Lake IL
Posts: 1,305
Likes: 0
Received 0 Likes
on
0 Posts
actually everything should be ok... I just looked and the passenger side 2nd from the back, spark plug wire was loose (cant remember which cylinder number it is)
so i disconnected the battery to reset the pcm and snap the wire back on. I know this would cause a misfire which would cause my o2 codes.
so hopefully that is the problem. I will find out tomorrow when i drive to work!
so i disconnected the battery to reset the pcm and snap the wire back on. I know this would cause a misfire which would cause my o2 codes.
so hopefully that is the problem. I will find out tomorrow when i drive to work!
#20
TECH Fanatic
Thread Starter
iTrader: (7)
Join Date: Dec 2003
Location: Las Vegas, from Crystal Lake IL
Posts: 1,305
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Cobra2WS6
DAm almost 420rwhp thats some awesome numbers
with a fram paper air filter too..
thanks dude!!!
I gained 10 rwhp when I pulled the filter on just bolt ons, so I would bet I would be close to 430 without it now!