Dyno Tune Cam Vinci High Performance
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Got car dynoed this past weekend and with a 216/224/115 cam, pacesetter headers, Vinci tuner VHP 170 Therm, LS6 intake, Asp pulley, Crane Gold Race 1.8 Roller Rockers etc.
377 rwhp and 370lbs Torque. 4th gear tops out at 124mph
I would like to thank, Joe, Roger and Greg for meeting my performance needs. Thanks Joe for the phone calls.
The torque on these cams are unbelieveable look at graph attatched.
What do u guys think. Next is Nitrous
377 rwhp and 370lbs Torque. 4th gear tops out at 124mph
I would like to thank, Joe, Roger and Greg for meeting my performance needs. Thanks Joe for the phone calls.
The torque on these cams are unbelieveable look at graph attatched.
What do u guys think. Next is Nitrous
#2
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
How do u download dyno graph to this site?
For some reason it wont upload. anyway this was my dyno #'s 377rwhp and 370ibs 4th topped out at 124mph.
So this equates to 443 hp at the crank and 435 tq. with a 15% drivetrain loss.Not bad for a small cam.
What do u guys think?
For some reason it wont upload. anyway this was my dyno #'s 377rwhp and 370ibs 4th topped out at 124mph.
So this equates to 443 hp at the crank and 435 tq. with a 15% drivetrain loss.Not bad for a small cam.
What do u guys think?
Last edited by corvet786c; 10-29-2007 at 07:57 PM.
#5
TECH Senior Member
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The easiest way is to have the picture on a server and then just use the photo button above to link to it.
I am running the same cam, you are about where I was with similar mods. I like the torque curve, I think it is right there with the venerable 224/224 cam and its nice an flat. Some of the lower LSA cams seem to have a dip in the torque curve at around 4,000 RPM.
Right now I am running Dart heads, but will be upgrading to AFR's soon. My goal is to push this little cam to over 400 hp (hopefully well over but we'll see
)
I am running the same cam, you are about where I was with similar mods. I like the torque curve, I think it is right there with the venerable 224/224 cam and its nice an flat. Some of the lower LSA cams seem to have a dip in the torque curve at around 4,000 RPM.
Right now I am running Dart heads, but will be upgrading to AFR's soon. My goal is to push this little cam to over 400 hp (hopefully well over but we'll see
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
Trending Topics
#10
10 Second Club
iTrader: (22)
Join Date: Feb 2006
Location: coastal N.C.
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The numbers look great Chris!
With the same set-up (cam and RR) my stalled auto put down 360hp/360tq through catted Mac mids (dyno tuned with HP tuners)
Get us some track numbers now !!!
With the same set-up (cam and RR) my stalled auto put down 360hp/360tq through catted Mac mids (dyno tuned with HP tuners)
Get us some track numbers now !!!
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
#11
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Overall I am happy with the setup. I would like at least 425-450 rwhp, so nitrous is next. The car was running a little lean, so we set it on cam#3 15% fuel enrch, this was the proper setting with air/fuel ratio of 13.5. Will get some track times soon when the weather gets nicer here in Fla. Thanks Junior, Joe, VHP and all who helped me reach my goals. We are goin to have to get together Junior and race ha ha ha ha. That was my old car ha ha ha.
#14
10 Second Club
iTrader: (3)
Join Date: Mar 2004
Location: orlando, fl
Posts: 4,266
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
send me the graph to mrrjjdh03@aol.com and i'll host the graph for you. very good numbers for a cam only set up.