CAM only F-body to take out a C6Z06!
#41
11 Second Club
iTrader: (88)
I've taken one down with my setup, I'm not Cam-only, but it woke up the guy driving the Z06..lol, that was when I had an Auto, SS3600, and 3.73's.
Once I get everything back up and running with the T56 setup and 3.50 Gears in the back, I'm interested to see how my car will do on a roll race from 60mph up.
Once I get everything back up and running with the T56 setup and 3.50 Gears in the back, I'm interested to see how my car will do on a roll race from 60mph up.
#43
Teching In
Join Date: Nov 2008
Location: jacksonville AR
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
mervs camaro did it with a 402 +h/c
it wasnt hard to do . my blazer pulled him on the launch but around 85 he passed me. i got a stock motor and now a lil spray and i think i could get close
#44
TECH Addict
iTrader: (10)
Join Date: Jul 2006
Location: Wood River, IL
Posts: 2,786
Likes: 0
Received 0 Likes
on
0 Posts
Unless your forced induction or nitrous, your ls1 won't last....
http://www.youtube.com/watch?v=jhQeU...eature=channel
http://www.youtube.com/watch?v=jhQeU...eature=channel
#45
TECH Regular
iTrader: (14)
Join Date: Oct 2005
Location: Oklahoma
Posts: 461
Likes: 0
Received 0 Likes
on
0 Posts
Yes you can if things line out right for you. I'd say you hav a 35% chance. Best bet is to find an area and go for it in the 1/8 mile from a dig, from a roll you are done. He should climb up your *** after that. Good luck and go race!
#46
Launching!
Join Date: Feb 2005
Location: Savannah, Ga
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
You wanna catch a LS7 Z06 the best and easiest way is forced induction. Save up get a nice turbo setup with supporting mods and you'll catch and pass a stock LS7 no problem. I love H/C setups but you can go so much farther with a FI setup.
#47
what everyone failed to mention is the OP said "ON THE STREET"
well now that makes a big difference. a healthy cam only ls1 that can hook on the street is more then capable of taking down a c6 zo6 especially if hes having trouble hooking (he will)
well now that makes a big difference. a healthy cam only ls1 that can hook on the street is more then capable of taking down a c6 zo6 especially if hes having trouble hooking (he will)
#48
11 Second Club
iTrader: (88)
I have stock Heads, so really it's just a Cam..
But I'm stroked, so there is little more with what I have compared to a LS1.
As far as a Cammed LS1, it'll be a drivers race and if the Vette hooks at the same time or before, the LS1 will be struggling..
Mine was on the street, I was spinning out of the hole just as bad as the Vette was, but I hooked and pulled away just by sheer power. Me and the Vette hooked at the same time pretty much. It will be some work for a Cam-only LS1. There isn't enough cubes there IMO..
But I'm stroked, so there is little more with what I have compared to a LS1.
As far as a Cammed LS1, it'll be a drivers race and if the Vette hooks at the same time or before, the LS1 will be struggling..
Mine was on the street, I was spinning out of the hole just as bad as the Vette was, but I hooked and pulled away just by sheer power. Me and the Vette hooked at the same time pretty much. It will be some work for a Cam-only LS1. There isn't enough cubes there IMO..