Dyno Guesses & Bench Racing Forum Horsepower Estimates | Racing Scenarios

Test drove a Terminator DEFINTELLY keeping my LS1

Thread Tools
 
Search this Thread
 
Old 02-05-2009, 01:05 PM
  #161  
On The Tree
 
Dynotune04's Avatar
 
Join Date: Dec 2006
Location: MA
Posts: 113
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by LS1nut377
well considering people used to flip out over the lt1 vettes pulling mostly mid 14's stock, then a ls1 ss,t/a,and svt pulling low 13,s its pretty good IMO
show me a full weight street car cam only f-body that will trap 125. i will take a cam only street car ls1 f-body and kindly show them my tail lights.
Old 02-05-2009, 02:24 PM
  #162  
12 Second Club
iTrader: (1)
 
PNYKLR-TA's Avatar
 
Join Date: Mar 2008
Location: North Phoenix, AZ
Posts: 847
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Dynotune04
show me a full weight street car cam only f-body that will trap 125. i will take a cam only street car ls1 f-body and kindly show them my tail lights.
well of coarse you will, but how much more did your car cost? he could easily spent 1k for some juice and turn right back around that statement and you'd be seeing his tail lights.



back and forth 9 pages deep.
Old 02-05-2009, 02:47 PM
  #163  
Tech Apprentice
iTrader: (1)
 
Stopsign32v's Avatar
 
Join Date: Dec 2006
Posts: 191
Received 0 Likes on 0 Posts

Default

Originally Posted by Dynotune04
show me a full weight street car cam only f-body that will trap 125. i will take a cam only street car ls1 f-body and kindly show them my tail lights.
Show me a N/A 4v cams only car that will run with a cam only LS1...
Old 02-05-2009, 03:00 PM
  #164  
TECH Regular
iTrader: (1)
 
7998's Avatar
 
Join Date: Jan 2007
Location: Levittown PA
Posts: 498
Likes: 0
Received 0 Likes on 0 Posts

Default

Oh what a pissing match. The 03/04 Cobra is a nice car and very Mod friendly. I wouldnt mind owning one, but the damn front drivers seat does not go back far enough for me. There biggest down fall is the people that drive them. A bunch of hair gel wearing fairies, bumping there dance music and talking about their rims and such.
.
.
.
.
.
.
.
.
.
..
.
.
.
..
j/k, not really
Old 02-05-2009, 03:05 PM
  #165  
TECH Senior Member
iTrader: (71)
 
lemons12's Avatar
 
Join Date: Jul 2007
Location: Winchester, TN
Posts: 11,088
Likes: 0
Received 2 Likes on 2 Posts

Default

Originally Posted by Dynotune04
show me a full weight street car cam only f-body that will trap 125. i will take a cam only street car ls1 f-body and kindly show them my tail lights.
that wasnt a very well thought out comment..


10.821 @ 126.9 (1.47), 97 SS, M6, Tex, 4.56, PSI 233/238, -1000+, 3458, 11/08

there is one... and you are comaring your car that is built, with a supercharger and blah blah blah blah.. to a car that has a cam, exhaust, intake, gears... thats not a very good comparison..

why not compare a H/C ls1? that much more fair since most trap very close to 125..

hell, for that matter.. why not do FI to FI... how many cam only ls1s spraying do you know that dont trap well over 125? i dont know of very many... how many H/C ls1s spraying that dont trap well over 130?

i like most of you mustang guys, but what kind of statement is that?

i will take my H/C ls1 and not so kindly show you my tail lights, is that relevant to anything in this thread? no..

Originally Posted by Stopsign32v
Show me a N/A 4v cams only car that will run with a cam only LS1...
+1

this is why i like most of the mustang owners, is because they dont make ignorant one sided posts/comments most of the time, they try to stay unbiased..
Old 02-05-2009, 04:07 PM
  #166  
On The Tree
 
Dynotune04's Avatar
 
Join Date: Dec 2006
Location: MA
Posts: 113
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by lemons12
that wasnt a very well thought out comment..


10.821 @ 126.9 (1.47), 97 SS, M6, Tex, 4.56, PSI 233/238, -1000+, 3458, 11/08

there is one... and you are comaring your car that is built, with a supercharger and blah blah blah blah.. to a car that has a cam, exhaust, intake, gears... thats not a very good comparison..

why not compare a H/C ls1? that much more fair since most trap very close to 125..

hell, for that matter.. why not do FI to FI... how many cam only ls1s spraying do you know that dont trap well over 125? i dont know of very many... how many H/C ls1s spraying that dont trap well over 130?

i like most of you mustang guys, but what kind of statement is that?

i will take my H/C ls1 and not so kindly show you my tail lights, is that relevant to anything in this thread? no..



+1

this is why i like most of the mustang owners, is because they dont make ignorant one sided posts/comments most of the time, they try to stay unbiased..
i head/cam set up i can agree with. if i had a dedicated suspension retarded gears and blah blah blah you can run 10's with a pulley only cobra as well. im not overly bias i like gm cars and think that lsx is a great platform. its just not for me. my statement was based around the ignorant people that think there average cam only ls1 will run with a pullied cobra.
Old 02-05-2009, 04:08 PM
  #167  
On The Tree
 
Dynotune04's Avatar
 
Join Date: Dec 2006
Location: MA
Posts: 113
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Stopsign32v
Show me a N/A 4v cams only car that will run with a cam only LS1...
i could show you an N/A stone stock longblock mach 1 that will out run 90% of cammed ls1's
Old 02-05-2009, 04:13 PM
  #168  
TECH Senior Member
iTrader: (71)
 
lemons12's Avatar
 
Join Date: Jul 2007
Location: Winchester, TN
Posts: 11,088
Likes: 0
Received 2 Likes on 2 Posts

Default

Originally Posted by Dynotune04
i head/cam set up i can agree with. if i had a dedicated suspension retarded gears and blah blah blah you can run 10's with a pulley only cobra as well. im not overly bias i like gm cars and think that lsx is a great platform. its just not for me. my statement was based around the ignorant people that think there average cam only ls1 will run with a pullied cobra.
i totally agree, a normal cam only setup, or a weak H/C setup will be beat almost always by a pullied cobra... a well built H/C setup or a serious cam only car can very well beat a pullied cobra..

in all, i agree with you! just said it a little wrong the first post..

Originally Posted by Dynotune04
i could show you an N/A stone stock longblock mach 1 that will out run 90% of cammed ls1's
im not up for that.. just like the guys on the ls1tech fastest cam only faster H/C cars.... just because they ran that time at their track doesnt mean they will everywhere..

the #1 guy could get beat at the same track same day by the #15 guy...

it would be a sad cam only ls1 to get beat by a bolt on mach.. they are equal from the factory with the edge to the ls1... add full bolt ons to both the ls1 has more advantage because of displacement.. add a cam, that is no question.

are his times at his track beter than 90% of cam only ls1s? possibly? will he beat 90% of cam only ls1s? i HIGHLY doubt it..
Old 02-05-2009, 04:16 PM
  #169  
On The Tree
 
Dynotune04's Avatar
 
Join Date: Dec 2006
Location: MA
Posts: 113
Likes: 0
Received 0 Likes on 0 Posts
Default

that mach 1 is a gutted race car and runs 11 teens with 320 rwhp. which is more than enough to take out MOST cam only cars.
Old 02-05-2009, 04:19 PM
  #170  
TECH Senior Member
iTrader: (71)
 
lemons12's Avatar
 
Join Date: Jul 2007
Location: Winchester, TN
Posts: 11,088
Likes: 0
Received 2 Likes on 2 Posts

Default

Originally Posted by Dynotune04
that mach 1 is a gutted race car and runs 11 teens with 320 rwhp. which is more than enough to take out MOST cam only cars.
hahaah... ok, gutted i can totally see..
Old 02-05-2009, 04:19 PM
  #171  
On The Tree
 
Dynotune04's Avatar
 
Join Date: Dec 2006
Location: MA
Posts: 113
Likes: 0
Received 0 Likes on 0 Posts
Default

what is impressive is that the car has at least 3,500 passes on it and the valve covers have never been off.
Old 02-05-2009, 04:20 PM
  #172  
TECH Senior Member
iTrader: (71)
 
lemons12's Avatar
 
Join Date: Jul 2007
Location: Winchester, TN
Posts: 11,088
Likes: 0
Received 2 Likes on 2 Posts

Default

Originally Posted by Dynotune04
what is impressive is that the car has at least 3,500 passes on it and the valve covers have never been off.
wow... any vids or anything?

its not red is it?
Old 02-05-2009, 04:20 PM
  #173  
On The Tree
 
Dynotune04's Avatar
 
Join Date: Dec 2006
Location: MA
Posts: 113
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by lemons12
hahaah... ok, gutted i can totally see..
yea. when i say gutted i mean gutted. guy cut the insides of the doors out. i wouldnt want anything to do with a car like that but it is kinda impressive.
Old 02-05-2009, 04:21 PM
  #174  
TECH Senior Member
iTrader: (71)
 
lemons12's Avatar
 
Join Date: Jul 2007
Location: Winchester, TN
Posts: 11,088
Likes: 0
Received 2 Likes on 2 Posts

Default

Originally Posted by Dynotune04
yea. when i say gutted i mean gutted. guy cut the insides of the doors out. i wouldnt want anything to do with a car like that but it is kinda impressive.
damn...

does it look stockish on the outside?

what does it trap?
Old 02-05-2009, 04:34 PM
  #175  
On The Tree
 
Dynotune04's Avatar
 
Join Date: Dec 2006
Location: MA
Posts: 113
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by lemons12
wow... any vids or anything?

its not red is it?
nah no vids. he used to post on svtp and mach1 registry all the time might be some videos there. the guys from new hampshire and lives about a mile away from NED so basicly any time i have been to the track hes been there running that car. i have talked to him a few times hes a bit of an odd duck.
Old 02-05-2009, 04:36 PM
  #176  
TECH Senior Member
iTrader: (71)
 
lemons12's Avatar
 
Join Date: Jul 2007
Location: Winchester, TN
Posts: 11,088
Likes: 0
Received 2 Likes on 2 Posts

Default

Originally Posted by Dynotune04
nah no vids. he used to post on svtp and mach1 registry all the time might be some videos there. the guys from new hampshire and lives about a mile away from NED so basicly any time i have been to the track hes been there running that car. i have talked to him a few times hes a bit of an odd duck.




is his car red?
Old 02-05-2009, 04:38 PM
  #177  
On The Tree
 
Dynotune04's Avatar
 
Join Date: Dec 2006
Location: MA
Posts: 113
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by lemons12
damn...

does it look stockish on the outside?

what does it trap?
from the outside it looks stock with drag wheels on it. i think it traps 119 or 120
Old 02-05-2009, 04:43 PM
  #178  
On The Tree
 
Dynotune04's Avatar
 
Join Date: Dec 2006
Location: MA
Posts: 113
Likes: 0
Received 0 Likes on 0 Posts
Default

no the car is blue
Old 02-05-2009, 04:50 PM
  #179  
TECH Senior Member
iTrader: (71)
 
lemons12's Avatar
 
Join Date: Jul 2007
Location: Winchester, TN
Posts: 11,088
Likes: 0
Received 2 Likes on 2 Posts

Default

damn, thought i had seen a vid of it before.. there is a vid of a "Stock internal" gt running like high 11s... its red..
Old 02-05-2009, 04:50 PM
  #180  
On The Tree
 
Dynotune04's Avatar
 
Join Date: Dec 2006
Location: MA
Posts: 113
Likes: 0
Received 0 Likes on 0 Posts
Default

actually i think this car is the car that took the record from blue mach 1
http://media.putfile.com/03-Mach-1-110307


Quick Reply: Test drove a Terminator DEFINTELLY keeping my LS1



All times are GMT -5. The time now is 01:37 PM.