ElkySS

iTrader: (6)

dynoed 363 rwhp and 356 fl/lbs with a 6 speed and a 12 bolt with 4.10s.
car should weigh about 3600 with me in it. on nitto drag radials.

iv been told that 11.9s are possible but i wanted some more opinions

ElkySS

iTrader: (6)

no one?

180ls1

iTrader: (4)

I dont think you will hit elevens, you have the power to do it as long as there is a decent DA. I think those nitto's are going to hold you back, but go give it a shot!

proace4

iTrader: (1)

i mean no offense but i have more power and on my MT et streets 28x10.5 I only run 12.4. no i know you have the M6 advantage but i weighed 3660 at the LTx shootout. I wish you the best! and maybe in a low low DA you might get it. my DA corrected time from KC the weekend of the Shootout was 11.95so its possible!

RaggedRides

iTrader: (8)

Your car could potentially do it with a good hook and the right shifting. That's up to your track, weather, your tires and your shifting.


Nice numbers. I don't think folks realize the type of power those old boat anchors make with a little work.

Demon 383

11's are going to be hard to on those nitto's. Do some weight reduction, put some better tires on there and some suspension mods if you don't already have them

z_speedfreak

iTrader: (3)

BAD ***! can't wait to finish installing mine, got the same cam what other mods do you have?

ElkySS

iTrader: (6)

^^ the heads wer lightly ported with a dremel just to smooth them out and it had impala ss head gaskets whick=h (to my understanding) brings compression ratio up to 11:1

it also does have an aphb, lower control arms, and a torque arm on it