nitr0racing21

iTrader: (5)

It's a 99 GT: full suspension
CAI catback intake manifold

Vs a bone stock 99 Z28

c5z28

iTrader: (11)

With headers those cars only make 260ish at the wheels. Give us the story, that's half the fun.

nitr0racing21

iTrader: (5)

it full bolt on minus headers sorry ment to say that, the mustang think he will run a 13.2 and I say the Z28 should run in the 13.1 range what everyone opinions for a stock Z28 with T TOPs

lemons12

iTrader: (71)

Was this post supposed to be a question, a statement? Its just a bunch of words thrown together.

nitr0racing21

iTrader: (5)

lol actually I was on the phone with my friend trying to get a list of mods done to his slowsstang ill edit it now

David_viny

2v's suck **** HP wise without boost or a TON of mods.

nitr0racing21

iTrader: (5)

so the question still stands what will a z28 run STOCK 6 speed

Blackbob

iTrader: (1)

Honestly, if you can drive because most mustang guys ( like myself ) are aware of the torque disadvantage. So if he is anything like me he'll try like hell to make sure he drills you out of the hole. If he sucks at life driving wise....I say the Z28. What's stopping you from just racing him ?? Win or lose the **** talking is half the fun.

99blownLS-WON

not even a race......blow him away and call it a day!

nitr0racing21

iTrader: (5)

Oh MY car will destory him but its my friend bone stock Z28 6 speed and I need to tell him how to lauch and all doy ou guys know the best way to laugh a stock car?

MonmouthCtyLS7

iTrader: (6)

If the LS1 is driven right u should still have him...

96lt1m6

iTrader: (31)

The only way that stang will beat the Z28 is if it has N20,blower or a turbo,the only way i would be concerned is if the stang was a 03/04 mach1 5spd on DRs.

nitr0racing21

iTrader: (5)

WELL now that you mention it that is a 04 mach one BONE stock that swears he can beat a SS camaro but not a Z28 camaro so he will also line up next to the Z28


I need to get my friend driver mod before these races

MonmouthCtyLS7

iTrader: (6)

Mach 1 is a 4 valve and if driven right it is a close race w/ a LS1.

lemons12

iTrader: (71)

It wont take all that to beat a stock Ls1. A mach1 certainly doesnt need DRs to be able to beat an Ls1.

A Mach1 and an Ls1 are purely a drivers race.. Ls1 definitely has the upper hand, but one small mistake and the Mach will pull you.

ponygt65

He's ignorant on Fbods then...that may work to your advantage.
+73000

R W B

iTrader: (5)

The full suspension on the Mustang will help him alot more then people are thinking out the hole if its set up right. I still think the Z28 should win if both cars are driven properly. The GT will put up a decent fight but in the end, it being under powered will show as the Z28 pulls slightly.

Now go race and tell us what happens. Better yet, video it and make it good, lol.

TXZ28LS1

iTrader: (5)

not sure how u mistaken a GT and a mach 1? but if its a GT you shouldnt have a problem. my old 00 Z28 automatic with just a lid and loudmouth and 2.73 pulled a GT 5 speed from a roll...lol.. i pulled an easy 3-4 cars.

bongva

iTrader: (7)

bonestock z28 running 13.1??? better be one hell of a driver.

i think the ls1 will come out on top, those older GT's are dog slow. if it were a new gt, well that would be a different story.

dirtynorth

the 4.6 modular motor is a pos. I have a auto lt1 car with a shift kit and long tubes and I walk all over my friend with a tuned 04 gt with long tubes, drag radials, short throw shifter and 30lb injectors. If that doesnt tell you something.....