just curious
10-01-2009, 12:25 PM
#1
just curious Well my car just went under the knife starting this week, pulling out motor and sending block to the machine shop to forged it out, going to be running 317 heads with patriot dual springs and epp boost cam,ls6 intake,85mm tb,hooker headers,12 bolt moser with 4:10's and d1 front mount procharger....
1st question is what hp do you think I can pull off?
second question is: buddy of mine is bulding a 95 cobra with 04 cobra block with a kenne bell, he says its a new supercharger called mammoth from kenne bell not sure what it is exactly, he says he should be close to 700hp with it, I personally cant believe that it can push that much on a stock 04 cobra block. or can it?
what do you think the outcome of this race would be? just wanted to see what you guys had to say, maybe some of you have seen a familiar race already
1st question is what hp do you think I can pull off?
second question is: buddy of mine is bulding a 95 cobra with 04 cobra block with a kenne bell, he says its a new supercharger called mammoth from kenne bell not sure what it is exactly, he says he should be close to 700hp with it, I personally cant believe that it can push that much on a stock 04 cobra block. or can it?
what do you think the outcome of this race would be? just wanted to see what you guys had to say, maybe some of you have seen a familiar race already
10-01-2009, 07:36 PM
#2
the 03/04 cobras have manley rods, forged pistons, forged crank and arp bolts, so their blocks can easily handle 800+hp to the wheels. ive seen many 03 cobras putting over 800whp on the stock bottom end, dont underestimate the 03/04 cobra. id think that you would be pretty close to him but watch out for that instant kenne bell torque
10-02-2009, 01:21 AM
#3
TECH Resident
iTrader: (3)
Join Date: Sep 2007
Location: Holmes County (thats right Amish Country), OHIO
Posts: 896
Likes: 0
Received 1 Like
on
1 Post
Just put sugar on his gas tank. And presto you have the win 
I kid I kid! Don't do that. But ya you should be close. However we do have a bench racing forum now so this is where this should go.
I kid I kid! Don't do that. But ya you should be close. However we do have a bench racing forum now so this is where this should go. 
10-05-2009, 09:01 PM
#7
TECH Enthusiast
iTrader: (1)
Join Date: Jun 2008
Location: Naperville, Ill
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
Absolutely. But right off the bat you will be over 500 rwhp
Trending Topics
10-07-2009, 08:56 AM
#12
yes talking about rwhp....
I want to try to push 12 to 14 lbs of boost and aiming for 650 hp
I will definately record it! hell both of us been working on these cars for about 4 months now, funds is slowing down the process but getting really close, he is a good friend of the family but we he comes over and we have a few beers you can imagine the S%*$ talking that goes on!
I want to try to push 12 to 14 lbs of boost and aiming for 650 hp
I will definately record it! hell both of us been working on these cars for about 4 months now, funds is slowing down the process but getting really close, he is a good friend of the family but we he comes over and we have a few beers you can imagine the S%*$ talking that goes on!