stalled ls1 vs bolt on tuned 2011 mustang.
#21
11 Second Club
iTrader: (3)
Join Date: Oct 2011
Location: Camden, DE
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
For what it's worth, I ran one of the new m6 2013 5.0's with bolt-on's and DRs a few weeks ago twice from a dig, and they were tight runs. I got him the first run, but he missed third, he got me by about 3/4 of a car coming back. I'm just bolt on's and 4000 stall, on nearly bald nitto DRs. A v6 should be nothing.
#22
Banned
iTrader: (1)
Join Date: Aug 2009
Location: chattanooga Tn
Posts: 1,352
Likes: 0
Received 0 Likes
on
0 Posts
Damn Andy thanks for the heads up man I'm currently getting my cam installed and have new dual valve springs pushrods and lifter put in as well the only good news is the guy who had the car before me had the heads worked and they are hand milled my mechanic said that do to the amount of head work on my stock Ls1 heads (cant remember if there 243's or 241 lol) ill have over 400rwhp and over 400 rwtrq so i got lucky.
#23
my cam goes in first week of february.
for what its worth, I raced a 5.0 the other day. probably a stock one, but my bolt on, stalled trans am pulled ever so slightly till he shut it down.
for what its worth, I raced a 5.0 the other day. probably a stock one, but my bolt on, stalled trans am pulled ever so slightly till he shut it down.
#25
dude has been ducking me for months. he was a facebook badass, and no hes nowhere to be found. he must have heard through the grape vine about the stall and the cam I ordered, which isnt going in for a week or so. I edged out a stock auto 5.0, (by a nose if that) and I dont think hes running with them. lol.
#26
TECH Enthusiast
You should race him and beat him buy a fender. then he will say"dude I almost had you."
then you can say- "You almost had me? You never had me - you never had your car... Granny shiftin' not double clutchin' like you should. You're lucky that hundred shot(in his case 50 shot) of NOS didn't blow the welds on the intake! You almost had me?
haha had to
then you can say- "You almost had me? You never had me - you never had your car... Granny shiftin' not double clutchin' like you should. You're lucky that hundred shot(in his case 50 shot) of NOS didn't blow the welds on the intake! You almost had me?
haha had to
#27
Banned
iTrader: (1)
Join Date: Aug 2009
Location: chattanooga Tn
Posts: 1,352
Likes: 0
Received 0 Likes
on
0 Posts
Any update on the race? I finally got my cam and everything else installed but then my tranny is going out yet again so I gotta get that fixed this summer ima get a price from hudlowaxle here in Chattanooga to build me a 12 bolt they are well known place. Id say you probably pulled 5-6 cars on his Dumbass bc honestly the LS1 motors put down some serious power being all motors and you def have the weight advantage as well.