Update on the LT Dan race car
#1
Update on the LT Dan race car
Well I guess it is time to post up a little update on the "MikeP ****** upper" as YeloFevr has named it. Well I Finally got the car running and took it out for a quick spin tonight to make sure things are ok. Still needs tuned but that will be happening over the next week or 2. Here is a run down
The last 2 years the car was a forged 347. Stock crank, Callie's rods and -8.6cc dished Diamond Pistons. The Motor had stock heads, 224/232 .581/.595 115 lsa cam with stock ls6 intake, ALKY control, 1 7/8 Kooks and 4" mufflex exhaust. Car put down 676rwhp through a M6 and MWC fab 9 at about 14psi. Car went 10.33@136mph with clutch issues@ 3525lbs.
The new setup:
Same 347 short block 243 heads with sodium intake valves and 1.60 exhaust valves that I ported. 235/251 .621/.624 115Lsa Comp LSR blower cam, Victor JR and Swapped to a TH400. Pulley combo is the same as before 7.25/3.7 as last year but I have a 3.4 waiting to get installed. once I see what it does like this.
Cage gets Certified this Saturday so I should be hitting the track in about 3 weeks to shake this thing down. I am hoping to see it go 9.50's I can't wait. Here is a start up and idle video from tonight
http://www.youtube.com/watch?v=uNMDdJGLsaQ
The last 2 years the car was a forged 347. Stock crank, Callie's rods and -8.6cc dished Diamond Pistons. The Motor had stock heads, 224/232 .581/.595 115 lsa cam with stock ls6 intake, ALKY control, 1 7/8 Kooks and 4" mufflex exhaust. Car put down 676rwhp through a M6 and MWC fab 9 at about 14psi. Car went 10.33@136mph with clutch issues@ 3525lbs.
The new setup:
Same 347 short block 243 heads with sodium intake valves and 1.60 exhaust valves that I ported. 235/251 .621/.624 115Lsa Comp LSR blower cam, Victor JR and Swapped to a TH400. Pulley combo is the same as before 7.25/3.7 as last year but I have a 3.4 waiting to get installed. once I see what it does like this.
Cage gets Certified this Saturday so I should be hitting the track in about 3 weeks to shake this thing down. I am hoping to see it go 9.50's I can't wait. Here is a start up and idle video from tonight
http://www.youtube.com/watch?v=uNMDdJGLsaQ
#4
11 Second Club
iTrader: (86)
Join Date: Nov 2005
Location: Oxford Pa
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
Well I guess it is time to post up a little update on the "MikeP ****** upper" as YeloFevr has named it. Well I Finally got the car running and took it out for a quick spin tonight to make sure things are ok. Still needs tuned but that will be happening over the next week or 2. Here is a run down
The last 2 years the car was a forged 347. Stock crank, Callie's rods and -8.6cc dished Diamond Pistons. The Motor had stock heads, 224/232 .581/.595 115 lsa cam with stock ls6 intake, ALKY control, 1 7/8 Kooks and 4" mufflex exhaust. Car put down 676rwhp through a M6 and MWC fab 9 at about 14psi. Car went 10.33@136mph with clutch issues@ 3525lbs.
The new setup:
Same 347 short block 243 heads with sodium intake valves and 1.60 exhaust valves that I ported. 235/251 .621/.624 115Lsa Comp LSR blower cam, Victor JR and Swapped to a TH400. Pulley combo is the same as before 7.25/3.7 as last year but I have a 3.4 waiting to get installed. once I see what it does like this.
Cage gets Certified this Saturday so I should be hitting the track in about 3 weeks to shake this thing down. I am hoping to see it go 9.50's I can't wait. Here is a start up and idle video from tonight
http://www.youtube.com/watch?v=uNMDdJGLsaQ
The last 2 years the car was a forged 347. Stock crank, Callie's rods and -8.6cc dished Diamond Pistons. The Motor had stock heads, 224/232 .581/.595 115 lsa cam with stock ls6 intake, ALKY control, 1 7/8 Kooks and 4" mufflex exhaust. Car put down 676rwhp through a M6 and MWC fab 9 at about 14psi. Car went 10.33@136mph with clutch issues@ 3525lbs.
The new setup:
Same 347 short block 243 heads with sodium intake valves and 1.60 exhaust valves that I ported. 235/251 .621/.624 115Lsa Comp LSR blower cam, Victor JR and Swapped to a TH400. Pulley combo is the same as before 7.25/3.7 as last year but I have a 3.4 waiting to get installed. once I see what it does like this.
Cage gets Certified this Saturday so I should be hitting the track in about 3 weeks to shake this thing down. I am hoping to see it go 9.50's I can't wait. Here is a start up and idle video from tonight
http://www.youtube.com/watch?v=uNMDdJGLsaQ
Trending Topics
#15
TECH Fanatic
iTrader: (12)
Join Date: Jan 2002
Location: York, PA
Posts: 1,249
Likes: 0
Received 0 Likes
on
0 Posts
Yeah let me know aswell i'll give my ole John HanCOCK on there for yuh buddy!!!! No worries we'll get that baby in the low 10's in no time!!!!! Luckily we took the horrible driver mod out and put the pusomatic in. She's gonna fly!!!!!! She'll even be all legal unlike all these vette guys not putting in all the proper safety equipment and stuff ya know
#18
Yeah let me know aswell i'll give my ole John HanCOCK on there for yuh buddy!!!! No worries we'll get that baby in the low 10's in no time!!!!! Luckily we took the horrible driver mod out and put the pusomatic in. She's gonna fly!!!!!! She'll even be all legal unlike all these vette guys not putting in all the proper safety equipment and stuff ya know