Capitol Raceway results from 11/21/10
#1
TECH Fanatic
Thread Starter
iTrader: (12)
Join Date: Jan 2002
Location: York, PA
Posts: 1,249
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well a couple of us went to Capitol Raceway today and figured we should have a thread for our new bests and runs from today.
I was able to get a new best ET and MPH.
Runs went as follows.
60ft-1.646
330ft-4.583
1/8mi-6.961
1/8mph-105.15-new best
1000ft-8.984
1/4mi-10.695
1/4mph-133.41mph-new best
next run
60ft-1.627-car hopped/spun
330ft-4.532
1/8mi-6.916
1/8mph-104.68mph
1000ft-8.944
1/4mi-10.661
1/4mph-132.86mph
last run
60ft-1.713-car bogged so bad it was down to 1000rpms after 4000rpm launch!
330ft-4.671
1/8mi-7.049
1/8mph-104.90
1000ft-9.073
1/4mi-10.786
1/4mph-133.07mph
In car videos of the runs
http://www.youtube.com/watch?v=bRArwxALWkI
So basically a huge let down cause the car was there, the shifting was there. Just needed the track and 60ft to come together which is always the tough part I guess. This really sucks after leaving out of a 6.880 at 104mph last week at cecil. We had great weather and I put 275/40/17's Mickey Thompson Drag radials (thanks to Billy B). The car definitely likes the slightly shorter tire versus the Hoosier 315/35/17 I was running.
I was able to get a new best ET and MPH.
Runs went as follows.
60ft-1.646
330ft-4.583
1/8mi-6.961
1/8mph-105.15-new best
1000ft-8.984
1/4mi-10.695
1/4mph-133.41mph-new best
next run
60ft-1.627-car hopped/spun
330ft-4.532
1/8mi-6.916
1/8mph-104.68mph
1000ft-8.944
1/4mi-10.661
1/4mph-132.86mph
last run
60ft-1.713-car bogged so bad it was down to 1000rpms after 4000rpm launch!
330ft-4.671
1/8mi-7.049
1/8mph-104.90
1000ft-9.073
1/4mi-10.786
1/4mph-133.07mph
In car videos of the runs
http://www.youtube.com/watch?v=bRArwxALWkI
So basically a huge let down cause the car was there, the shifting was there. Just needed the track and 60ft to come together which is always the tough part I guess. This really sucks after leaving out of a 6.880 at 104mph last week at cecil. We had great weather and I put 275/40/17's Mickey Thompson Drag radials (thanks to Billy B). The car definitely likes the slightly shorter tire versus the Hoosier 315/35/17 I was running.
#5
9 Second Club
iTrader: (10)
Join Date: Apr 2006
Location: Oxford, Chester County,Pa
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It was a rough day down there traction wise... I got no ET personal bests was hoping but couldnt land the traction I wanted... Here are my 3 of my runs...
60' 1.80
330' 4.70
1/8 7.07
mph 110.46
1000 9.05
1/4 10.71
mph 131. (let out of it...)
60' 1.892
330 7.732
1/8 7.05
mph 113.05
1000 9.04
1/4 10.65
mph 141.85
60' 1.696
330' 4.501
1/8 6.72
mph 114.33
1000 8.666
1/4 10.247
mph 146.94 (a bit lean on fuel probably should have not ran it that hard..)
60' 1.80
330' 4.70
1/8 7.07
mph 110.46
1000 9.05
1/4 10.71
mph 131. (let out of it...)
60' 1.892
330 7.732
1/8 7.05
mph 113.05
1000 9.04
1/4 10.65
mph 141.85
60' 1.696
330' 4.501
1/8 6.72
mph 114.33
1000 8.666
1/4 10.247
mph 146.94 (a bit lean on fuel probably should have not ran it that hard..)
Trending Topics
#9
9 Second Club
iTrader: (10)
Join Date: Apr 2006
Location: Oxford, Chester County,Pa
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Good always enjoy your camera work... I want to see that first pass... That pass took the wind out of my sails for the day... After that I figured it was just going to be an *** watching day down the track... Speaking of which you guys should bring your girlfiends with ya to the track...
#10
10 Second Club
iTrader: (12)
Join Date: May 2008
Location: glen rock pa
Posts: 542
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
yes it was a good day but lots of tire spinning and wheel hoping from all cars!! but i did good
1#
60' 1.609
330 4.520
1/8 6.894
mph 105.61
1000 8.927
1/4 10.623
mph 134.28
2#
60' 1.736
330 4.597
1/8 6.949
mph 106.23
1000 8.966
1/4 10.653
mph 134.86
3#
60' 1.616
330 4.479
1/8 6.827
mph 106.34
1000 8.837
1/4 10.517
mph 135.43 (time for a 10 point cage)
1#
60' 1.609
330 4.520
1/8 6.894
mph 105.61
1000 8.927
1/4 10.623
mph 134.28
2#
60' 1.736
330 4.597
1/8 6.949
mph 106.23
1000 8.966
1/4 10.653
mph 134.86
3#
60' 1.616
330 4.479
1/8 6.827
mph 106.34
1000 8.837
1/4 10.517
mph 135.43 (time for a 10 point cage)
#11
TECH Fanatic
Thread Starter
iTrader: (12)
Join Date: Jan 2002
Location: York, PA
Posts: 1,249
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
That little LS7 is gonna fly once the 60fts come down to 1.4x's and even better air and track prep. I see 10.2's at 136mph in your future!!! Badass to have the simplicity of the NA 427/LS7 isnt it AJ
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#14
11 Second Club
iTrader: (2)
Join Date: May 2009
Location: Oxford,Pa
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Congrats Guys really wish I could of been there but had a wonderful day with a family member I have not seen in 4+ years....
Pending family commitments I may need your encouragement(and an orange turd in the other lane)this coming weekend as I try and push the brick into the sub 11.6s.
Good always enjoy your camera work... I want to see that first pass... That pass took the wind out of my sails for the day... After that I figured it was just going to be an *** watching day down the track... Speaking of which you guys should bring your girlfiends with ya to the track...
#15
9 Second Club
iTrader: (22)
Join Date: Mar 2008
Location: Lancaster,Pa.
Posts: 777
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hopefully when you guys go to MIR they aren't stingy with the water in the burnout box. Had some trouble pushing the front tires and wheel hop during a few burnouts. Wondering if that had something to do with me breaking my driveshaft at the end of the day?.... Track prep was stellar otherwise. Good luck to you all in december. I'm done for the year now.
#16
9 Second Club
iTrader: (22)
Join Date: Mar 2008
Location: Lancaster,Pa.
Posts: 777
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Congrats Guys really wish I could of been there but had a wonderful day with a family member I have not seen in 4+ years....
Pending family commitments I may need your encouragement(and an orange turd in the other lane)this coming weekend as I try and push the brick into the sub 11.6s.
Pending family commitments I may need your encouragement(and an orange turd in the other lane)this coming weekend as I try and push the brick into the sub 11.6s.
#17
9 Second Club
iTrader: (10)
Join Date: Apr 2006
Location: Oxford, Chester County,Pa
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hopefully when you guys go to MIR they aren't stingy with the water in the burnout box. Had some trouble pushing the front tires and wheel hop during a few burnouts. Wondering if that had something to do with me breaking my driveshaft at the end of the day?.... Track prep was stellar otherwise. Good luck to you all in december. I'm done for the year now.
Borrow Lt.Dans rear end...(hell I think Devilish has borrowed Lt.Dans rear end some... But hey I dont think it was his cars rear end.) Its going to be nothing but a parts car for a year soon as he gets in the new house...
Wheel hops never a good thing... Been there done that... (BOOM!!!)
#18
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Zturd and MikeP warm-up lap:
http://www.youtube.com/watch?v=CgWZoqVgiU4
The rest of the runs:
http://www.youtube.com/watch?v=UZDCalCB0KI
http://www.youtube.com/watch?v=CgWZoqVgiU4
The rest of the runs:
http://www.youtube.com/watch?v=UZDCalCB0KI
Last edited by YeloFevr; 11-21-2010 at 08:49 PM.
#19
11 Second Club
iTrader: (2)
Join Date: May 2009
Location: Oxford,Pa
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Quitter!!!!!
Borrow Lt.Dans rear end...(hell I think Devilish has borrowed Lt.Dans rear end some... But hey I dont think it was his cars rear end.) Its going to be nothing but a parts car for a year soon as he gets in the new house...
Wheel hops never a good thing... Been there done that... (BOOM!!!)
Borrow Lt.Dans rear end...(hell I think Devilish has borrowed Lt.Dans rear end some... But hey I dont think it was his cars rear end.) Its going to be nothing but a parts car for a year soon as he gets in the new house...
Wheel hops never a good thing... Been there done that... (BOOM!!!)
#20
9 Second Club
iTrader: (22)
Join Date: Mar 2008
Location: Lancaster,Pa.
Posts: 777
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Quitter!!!!!
Borrow Lt.Dans rear end...(hell I think Devilish has borrowed Lt.Dans rear end some... But hey I dont think it was his cars rear end.) Its going to be nothing but a parts car for a year soon as he gets in the new house...
Wheel hops never a good thing... Been there done that... (BOOM!!!)
Borrow Lt.Dans rear end...(hell I think Devilish has borrowed Lt.Dans rear end some... But hey I dont think it was his cars rear end.) Its going to be nothing but a parts car for a year soon as he gets in the new house...
Wheel hops never a good thing... Been there done that... (BOOM!!!)
BTW my rear is fine just my shaft broke
![Icon Lol](https://ls1tech.com/forums/images/smilies2/icon_lol.gif)