Anybody Here Need
Thread Starter
Teching In
Joined: Nov 2004
Posts: 15
Likes: 0
Anybody Here Need Performance parts. Have a ton for sale but am new to the site so can't post in the sale section. Heads,cam,intake,exhaust,12-bolt,etc. Please email me if interested. Parts gotta go fast. Financially strapped.
Whats your email? I am interested in the 12 bolt. Describe it for me. Hit me up via email:
jrbellas95z28@yahoo.com
jrbellas95z28@yahoo.com
Thread Starter
Teching In
Joined: Nov 2004
Posts: 15
Likes: 0
The heads are Absolute Speed ST2 5.3's.
2.04 intake valves and 1.57 exhaust valves
comp978 dual valvesprings good up to 650 lift
unmilled-comp ratio 11.1
titanium retainers
1100 miles on heads
perfect condition=$1150
2.04 intake valves and 1.57 exhaust valves
comp978 dual valvesprings good up to 650 lift
unmilled-comp ratio 11.1
titanium retainers
1100 miles on heads
perfect condition=$1150
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
Teching In
Joined: Nov 2004
Posts: 15
Likes: 0
Exhaust-Magnaflow catback-$250
Cam-tsp 231/237-595/598-112-$300
Wheels- Centerline warriors- Front 15x6-rears15x8.5 with MT ET streets on the rears. 6 passes on the ET streets. No grinding of the caliper. One front wheel has a little curb rash but nothing terrible.-$400
LS6 intake-$350
TSP airlid-$75
BBk 80mm TB-$350
All parts have very low miles and are in excellent condition.
Cam-tsp 231/237-595/598-112-$300
Wheels- Centerline warriors- Front 15x6-rears15x8.5 with MT ET streets on the rears. 6 passes on the ET streets. No grinding of the caliper. One front wheel has a little curb rash but nothing terrible.-$400
LS6 intake-$350
TSP airlid-$75
BBk 80mm TB-$350
All parts have very low miles and are in excellent condition.
I'm intrested in the 12 bolt. E-mail me the info on it, I live in CT. I'd want the driveshaft too if you had one made that will fit a t56/ 4l60 How may miles are on it?
LJO524@aol.com
I'm gonna check and see if the rear could have 4 channel added to it......
LJO524@aol.com
I'm gonna check and see if the rear could have 4 channel added to it......
Thread Starter
Teching In
Joined: Nov 2004
Posts: 15
Likes: 0
I am located in Maryland.
Parts i still have left are:
LS6 INTAKE-$325
BBK 80MM TB-$325
MAGNAFLOW CATBACK W/FLOWTECH CUTOUT-$250
TSP CAM-231/237-595/598-112-$285
TSP AIRLID-$75
CENTERLINE WARRIOR WHEELS W/ 2 ET STREETS-$400
COMP R LIFTERS-$125
COMP HARDENDED PUSHRODS-$65
ASP PULLEY-$125
Parts i still have left are:
LS6 INTAKE-$325
BBK 80MM TB-$325
MAGNAFLOW CATBACK W/FLOWTECH CUTOUT-$250
TSP CAM-231/237-595/598-112-$285
TSP AIRLID-$75
CENTERLINE WARRIOR WHEELS W/ 2 ET STREETS-$400
COMP R LIFTERS-$125
COMP HARDENDED PUSHRODS-$65
ASP PULLEY-$125
