started my cam swap
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: Nov 2006
Location: fort lauderdale
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
started my cam swap
cam swap is easy it look hard but when u get to doing it and if u got the rite tools its **** easy oh yea the guy who helped me swap my motor didnt put lock tight on the balancer bolt so it started walking out on me so didnt have to mess wit tht i came out by hand no force
Trending Topics
#8
On The Tree
Thread Starter
iTrader: (2)
Join Date: Nov 2006
Location: fort lauderdale
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Well decided to go rambo when taking out cam and droped a lifter in the dam oil pan pita. There goes my weekend any help or ideas on getting it out. Oh yea anyone from palm beach to miami area got a set of 241 or 243 they want to get ridd of since i got to take heads off might has change these 853 out sorry about the poor grammer
Last edited by camross998; 08-25-2011 at 08:01 PM.
#15
FormerVendor
iTrader: (14)
Join Date: Mar 2010
Location: Pompano Beach, FL
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
If you're a man, you'll give the cam a quick spin and pull her out. Lifter trays hold the lifters in place. You immediately put the other cam in. We've NEVER had a problem, but then again that's why we get paid to do it.
Erik@Lashway
Erik@Lashway
#16
FormerVendor
iTrader: (14)
Join Date: Mar 2010
Location: Pompano Beach, FL
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
Even the JRP tools suck - they barely fit. Just let the trays do their job.
Erik@Lashway