Anyone From Pensacola post up with Pics!!
#521
TECH Regular
iTrader: (18)
Join Date: Jul 2003
Location: Joppa, MD
Posts: 493
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by TransLS1
ok my gears are coming and im looking for some help they are 3.42's to change out the 2.73's i got back there. i got shims for them. im hopeing someone(BEN) can help me out with putting them in. i will pay and provide food and refreshments to anyone that can help or that just wants to watch-andrew
One thing I don't do is gears. If you mess up one little measurement, your gears will not last very long. And I don't have the correct tools to do it. But I would suggest Robert Tau Automotive for gear swaps. But my suggestion is bring in the rearend and have him do it. Not the whole car. It's cheaper that way. If you can find someone else that does it, make sure they know what they are doing. Just my .02. Sorry I can't help anymore.
Ben
#522
12 Second Club
Thread Starter
Join Date: Dec 2004
Location: Eglin AFB Shalimar, FL
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
ok well thanks would you help me take my rear-end out then haha do you have a trailor? how old do you think i would be with out a car? have you guys heard anything good about headmen headers (1 5/8 to 1 3/4 to 3in collector.--andrew
#525
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
My problem still isn't fixed. I've changed the #2 plug, all the wires, the passenger 02. Checked for any melted wires. Still no change. I'm going to have John check it out to see if he can diagnose the problem. If not I'll have to take it somewhere to get it fixed.
I got my wisdom teeth pulled yesterday, so I'm not up to working on her today. I hope get it fixed. I still have to install my clutch and my suspension parts.
Luke
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
I got my wisdom teeth pulled yesterday, so I'm not up to working on her today. I hope get it fixed. I still have to install my clutch and my suspension parts.
Luke
#526
11 Second Club
iTrader: (5)
Join Date: Jul 2005
Location: Crestview, FL
Posts: 510
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
hey, all
i am in crestview, drive cam/exhaust, black ram air 2002 formula. i sometimes meet up in p-cola with some friends. i will try to meet up @ 9 mile bk some sat night to meet all of u, other-wise it's @ sears.
i am in crestview, drive cam/exhaust, black ram air 2002 formula. i sometimes meet up in p-cola with some friends. i will try to meet up @ 9 mile bk some sat night to meet all of u, other-wise it's @ sears.
#527
12 Second Club
Thread Starter
Join Date: Dec 2004
Location: Eglin AFB Shalimar, FL
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
#528
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Okay, good news and bad news.Good news: I figured out what was wrong with my car. Bad news: it might have seriously messed me up.
Apparently I didn't properly torque down one of the rocker arms on the #2 cylinder. So when I did a WOT run after John tuned it, the rocker arm came completely off the pushrod and valve!
Now I've fixed it and re-checked all the other rocker arms as well.
What could be the consequences of the rocker arm being off the pushrod and valve for about 10 miles in low rpms. It was the second valve, the one closer to the back of the engine that was off. It seems to run okay now, it ran a few minutes without an SES light but came back on after a second start-up. The idle is a little rough, but other than that it seems fine but I'm afraid to drive it in case something is screwed up. I'd appreciate any help you guys can think of.
Luke
Apparently I didn't properly torque down one of the rocker arms on the #2 cylinder. So when I did a WOT run after John tuned it, the rocker arm came completely off the pushrod and valve!
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
What could be the consequences of the rocker arm being off the pushrod and valve for about 10 miles in low rpms. It was the second valve, the one closer to the back of the engine that was off. It seems to run okay now, it ran a few minutes without an SES light but came back on after a second start-up. The idle is a little rough, but other than that it seems fine but I'm afraid to drive it in case something is screwed up. I'd appreciate any help you guys can think of.
Luke
#529
12 Second Club
Thread Starter
Join Date: Dec 2004
Location: Eglin AFB Shalimar, FL
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
damn man, if there is anything you need help with like an extra hand let me know i am pretty strong hahaha.. nah but really if you need anything let me know--andrew
#530
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ben and John, I appreciate the help last night. SES light went off but came back on this afternoon so I figured it's just header related and I'll have to live with it.
Good news for you Ben, my TPS seems to be fine so my old one is all yours. If you want I'll be working on my car Saturday morning you can bring by your PS pump and hoses and I'll swap ya and give you the TB as well.
Hopefully I'll be able to take my car to BK finally. I haven't been all summer.
Luke
Good news for you Ben, my TPS seems to be fine so my old one is all yours. If you want I'll be working on my car Saturday morning you can bring by your PS pump and hoses and I'll swap ya and give you the TB as well.
Hopefully I'll be able to take my car to BK finally. I haven't been all summer.
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
Luke
#532
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Fort Walton here. I was at BK on 9 mile road the other night. Cool cars there. Im wanting to get a LS1 SS so id like to hook up with you guys sometime.
Were is this Bealls i see you guys talking about??
well, hope to see yall soon.
Were is this Bealls i see you guys talking about??
well, hope to see yall soon.
#535
TECH Regular
iTrader: (18)
Join Date: Jul 2003
Location: Joppa, MD
Posts: 493
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by TransLS1
is this a good daily driver cam: MTI R1 232 236 .575 .578 114LS what kind of power would i be looking at making? anyone....
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Originally Posted by TNC_LS1
ben i think im gonna get this cam what do you think??? 234/230 .598 .592
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#539
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hey Thomas, I still vote for replacing those "snoop dogg" rims.
But on a more serious note, I hear good things about Thunder Racing's Cheater Cam, works great with stock manifolds. That first cam you had looked like a turbo grind.
I finally got my car running right so I could beat on it, the rain held me up for 4 hours on Saturday, thats why I missed BK. Stupid o-ring.
Feels great to finally open her up. Hopefully I can get my clutch in and join everyone at the track.
Anybody know of a fast little yellow SRT-4. That sucker had a car+ on me, I think he said his name was Kenny.
Ben how did Raegans car run at Atmore?
Luke
![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
But on a more serious note, I hear good things about Thunder Racing's Cheater Cam, works great with stock manifolds. That first cam you had looked like a turbo grind.
I finally got my car running right so I could beat on it, the rain held me up for 4 hours on Saturday, thats why I missed BK. Stupid o-ring.
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
Anybody know of a fast little yellow SRT-4. That sucker had a car+ on me, I think he said his name was Kenny.
Ben how did Raegans car run at Atmore?
Luke