My KYTP build
#202
12 Second Club
Thread Starter
iTrader: (10)
Join Date: Dec 2006
Location: Fannett, Tx
Posts: 1,316
Likes: 0
Received 0 Likes
on
0 Posts
GOING AUTO
Like many others I had dreams of a quick six speed car, and like those same people and that same dream went out the window in a cloud of clutch smoke.
I had been doing a lot of reading about putting a 4l80 in the car the past few months. I even got a price on one a few days before my clutch failed (jinxed myself). The parts started showing up last Friday. I pulled the t56 out Monday and installed the auto tonight. I used to think the six speed was heavy, HA. This thing is a tank, then I put the converter on it. Went in easier than I thought for doing it by myself in the driveway.
Jake's Performance 4l80 with a transbrake
Yank PY3600
Yank crossmember, it was a very close fit maybe 1/32"-1/16"
B&M cooler 70297
B&M Quicksilver
In addition to this I also ordered
Wolfe 6 point weld in
Corbeau Forza 2 seats
New carpet
RJS 5 point harness
I will probably try to start that install next weekend.
Like many others I had dreams of a quick six speed car, and like those same people and that same dream went out the window in a cloud of clutch smoke.
I had been doing a lot of reading about putting a 4l80 in the car the past few months. I even got a price on one a few days before my clutch failed (jinxed myself). The parts started showing up last Friday. I pulled the t56 out Monday and installed the auto tonight. I used to think the six speed was heavy, HA. This thing is a tank, then I put the converter on it. Went in easier than I thought for doing it by myself in the driveway.
Jake's Performance 4l80 with a transbrake
Yank PY3600
Yank crossmember, it was a very close fit maybe 1/32"-1/16"
B&M cooler 70297
B&M Quicksilver
In addition to this I also ordered
Wolfe 6 point weld in
Corbeau Forza 2 seats
New carpet
RJS 5 point harness
I will probably try to start that install next weekend.
#206
TECH Addict
iTrader: (8)
Join Date: Oct 2008
Location: toronto ontario canada
Posts: 2,047
Likes: 0
Received 2 Likes
on
2 Posts
are you going to use that for the transmission cooler ?
i got the same cooler, but i will be using it to cool engine oil not transmission
the inlet/outlet on mine are -10 and i think that is a little too big for a tranny cooler
- 6 should be plenty
i got the same cooler, but i will be using it to cool engine oil not transmission
the inlet/outlet on mine are -10 and i think that is a little too big for a tranny cooler
- 6 should be plenty
#207
12 Second Club
Thread Starter
iTrader: (10)
Join Date: Dec 2006
Location: Fannett, Tx
Posts: 1,316
Likes: 0
Received 0 Likes
on
0 Posts
I'm using 3/8 barb x 1/2 npt fittings. I'm trying to mount it now, bending flat bar to make the bracket is taking some trial and error.
I know about how much I have spent on parts, I couldn't imagine what the labor bill would be.
I know about how much I have spent on parts, I couldn't imagine what the labor bill would be.
#208
sorry if i missed it, any numbers on it yet? It's been a long time since I've seen your car, I think I saw it at target in beaumont a few months back, if im not mistaken. def saw it somewhere though. bad *** build for sure
#209
12 Second Club
Thread Starter
iTrader: (10)
Join Date: Dec 2006
Location: Fannett, Tx
Posts: 1,316
Likes: 0
Received 0 Likes
on
0 Posts
The only time I had it dyno'ed was about a year ago at Triangle because I knew something wasn't right. It only made 530rwhp on their mustang dyno and fell off fast above 6k. It went 10.61 at 131 at that power level though.
#210
yeah my buddy has his old GT on their dyno, i think at the time it only put out like 250ish lol. i did see a white ford gt there once, put out over 800 and it was pretty bad ***.. will this thing be back out at kohls once the auto is in?
#214
yeah, it def was a bad bitch. with that short exhaust, right in front of that wall like that.. it was loud as ****. one of these weekends i'll swing out to kohls, not sure if i'll be in my car or not. im sure if i were in my car i'd get put in my place in a hurry, lol. my plates arent exactly ford fan material. maybe i'll swing out with a buddy in his blacked out 5th gen sometime
#215
Staging Lane
iTrader: (1)
Join Date: Feb 2010
Location: brookings Or.
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
just got done reading the whole thread. great job!! i cant wait to tear into mine(99zM6)in a month or so. ive been reading all the turbo threads(cant get enough!) and ive been leaning towards a DIY build like 1badls1's build. Or even startin out with an ebay kit.but after this thread i mite try to get josh's kit(instead of buildn my yota), idk yet.only thing im worried about is tuning, i live in oregon and tuners are few and far between. and i dont think im smart enough to learn hp tuners. lol. i heard that tom wong out of Vancouver WA is a badass but he doesnt hav a website.is there any other good tuners in oregon or N cali?.........Anyways,got alittle off topic,
badass build sluggish!! keep us posted!
badass build sluggish!! keep us posted!
Last edited by BOBthe4dH8r; 04-26-2010 at 04:59 PM.
#216
12 Second Club
Thread Starter
iTrader: (10)
Join Date: Dec 2006
Location: Fannett, Tx
Posts: 1,316
Likes: 0
Received 0 Likes
on
0 Posts
Put the Strange slip yoke on my DS today and almost ripped off my thumb nail in the process, lol. I had to take a flap wheel to the holes to make the U-joint caps fit but the finally went on.
But of course I have ran into another potential problem. I think my DS is to short.
I also tried to bolt up the stall to flex plate but it looks like I am going to have to remove the down pipe so I can torque it down. After I took off my old slip yoke my friend notice something funny about it. Notice something not right about the splines. It was hard to catch with the camera but the splines are twisted.
Also have a 4l80 trans question that maybe able to be answered here before I make a thread in the auto section. What size and thread count is the nut that goes on the gear selector shaft?
But of course I have ran into another potential problem. I think my DS is to short.
I also tried to bolt up the stall to flex plate but it looks like I am going to have to remove the down pipe so I can torque it down. After I took off my old slip yoke my friend notice something funny about it. Notice something not right about the splines. It was hard to catch with the camera but the splines are twisted.
Also have a 4l80 trans question that maybe able to be answered here before I make a thread in the auto section. What size and thread count is the nut that goes on the gear selector shaft?
#218
12 Second Club
Thread Starter
iTrader: (10)
Join Date: Dec 2006
Location: Fannett, Tx
Posts: 1,316
Likes: 0
Received 0 Likes
on
0 Posts
This auto swap giving more **** then anything I have ever done to the car. I already had to pull the trans back out twice, once to cut on the tunnel the other to fix the threads on the stall I almost stripped out. My exhaust hits the trans pan so I will need to rework that. I think the DS is going to be to short. I was a cheap *** and ordered a Hughes dip stick tube thinking I could bend it and make it fit like MightyMouse did and save $30 bucks, 2 hours later it is bent to hell and still doesn't fit. **** me running.
#220
anyway.. /threadjack.